11-08-2008, 10:26 PM | #1 |
Not Yet Wild
Join Date: Jul 2007
Posts: 2
|
Hello
Hi, I Jim from North Alabama. I have some questions about a build on a workhorse I purchased last year. So far I've built an a arm front end and a link rear end set up(copied the idea off the computer, sounds better than stole it). Bought some shocks off ebay from a rhino had a diesel motor, but figured I would need something a little bigger, so Monday I've located a couple motorcycle motors to go in instead. The engine is gonna be a 650cc or a 750cc so I will have enough horsepower to use it in the sand, and was wandering if anyone had used belts for the drive, or will they not hold up and do I have to use a chain. I plan on using the easygo rear end so to have reverse. Any information would be greatly appreciated. Thanks a bunch guys Jim
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-13-2008, 11:11 AM | #2 |
Not Yet Wild
Join Date: Jul 2007
Posts: 2
|
Re: Hello
Update, help I need help!!!!! I have a Kawasaki kz750 engine sitting in the cradle now, but I run into another problem. The rear end is geared 13.32.1 and the motor is geared about 2.2.1 so I need to gear down alot. Any body with a motorcycle engine have any ideas on how to do this. Any information would be appreciated while I have a little hair left. Thanks Jim
|