Lifted ezgo and cables are now to short.

Shanewaters04 · 11-01-2014, 07:34 PM

Hey guys I originally lifted my cart and had hydraulic brakes on the rear. The cart wasn't performing as well as I wanted so I removed and re-installed the factory drums until I replace those with ausco. We now I have a new problem, my cables are to short. I can swap my passenger side to the driver but does anybody know a part number for a longer cable for the passenger ? Or where I can purchase one. 99 ezgo txt btw

Sent from my iPhone using Tapatalk

chriskent85 · 11-01-2014, 08:03 PM

Do you still have the lines hanging from the factory hangers? If so you can take them loose from the hangers and it will reach just fine. Then you can zip-tie the line up to the hangers

Shanewaters04 · 11-01-2014, 09:00 PM

Yes still in factory hangers, I'm assuming remove from the rear hangers?

Sent from my iPhone using Tapatalk

bokeasmowl · 11-01-2014, 09:12 PM

They make a drop bracket that will make the cables long enough. It's just a bolt on and it works.

chriskent85 · 11-01-2014, 10:27 PM

There should be a hanger under the battery trey in the center and another one beside the battery trey on the Dr side.

Shanewaters04 · 11-02-2014, 04:44 PM

I gotcha now, I have a custom built tray so no hold downs for the cables. I did swap the sides of the backing plates (driver to passenger-passenger to driver and it fixed the problem. Thanks guys

Sent from my iPhone using Tapatalk

11-01-2014, 07:34 PM	#1
Shanewaters04 Getting Wild Join Date: Feb 2014 Location: Glennville georgia Posts: 128	Lifted ezgo and cables are now to short. Hey guys I originally lifted my cart and had hydraulic brakes on the rear. The cart wasn't performing as well as I wanted so I removed and re-installed the factory drums until I replace those with ausco. We now I have a new problem, my cables are to short. I can swap my passenger side to the driver but does anybody know a part number for a longer cable for the passenger ? Or where I can purchase one. 99 ezgo txt btw Sent from my iPhone using Tapatalk

11-01-2014, 08:03 PM	#2
chriskent85 Gone Wild Join Date: Nov 2013 Posts: 706	Re: Lifted ezgo and cables are now to short. Do you still have the lines hanging from the factory hangers? If so you can take them loose from the hangers and it will reach just fine. Then you can zip-tie the line up to the hangers
chriskent85 Gone Wild Join Date: Nov 2013 Posts: 706

11-01-2014, 09:12 PM	#4
bokeasmowl friends call me Boke Join Date: Apr 2008 Location: Smithfield, North Carolina Posts: 7,772	Re: Lifted ezgo and cables are now to short. They make a drop bracket that will make the cables long enough. It's just a bolt on and it works.

11-01-2014, 10:27 PM	#5
chriskent85 Gone Wild Join Date: Nov 2013 Posts: 706	Re: Lifted ezgo and cables are now to short. There should be a hanger under the battery trey in the center and another one beside the battery trey on the Dr side.
chriskent85 Gone Wild Join Date: Nov 2013 Posts: 706

Similar Threads
Thread	Forum
Dead short re-connecting battery cables	Electric EZGO
2004 48v club car battery cables to short	Electric Club Car
Short run time on lifted ds	Electric Club Car
Lifted,now rear shocks to short	Lifted Golf Carts
Brake Cables To Short	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-01-2014, 09:00 PM	#3
Shanewaters04 Getting Wild Join Date: Feb 2014 Location: Glennville georgia Posts: 128	Yes still in factory hangers, I'm assuming remove from the rear hangers? Sent from my iPhone using Tapatalk

11-02-2014, 04:44 PM	#6
Shanewaters04 Getting Wild Join Date: Feb 2014 Location: Glennville georgia Posts: 128	I gotcha now, I have a custom built tray so no hold downs for the cables. I did swap the sides of the backing plates (driver to passenger-passenger to driver and it fixed the problem. Thanks guys Sent from my iPhone using Tapatalk