|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
06-15-2015, 07:43 AM | #1 |
Gone Wild
Join Date: Apr 2015
Location: Athens, GA
Posts: 349
|
Brake cable replacement after installing lift
I installed a 6" lift and the cables aren't long enough to route through the cable clips. It seems to me like it would be OK just not to use the clips. Just wondering what others are doing? Buying longer cables or bypassing the clips?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-15-2015, 07:51 AM | #2 |
Gone Wild
Join Date: Jun 2014
Location: Brandon MS
Posts: 309
|
Re: Brake cable replacement after installing lift
I have mine just running low. Looks kind of funny but works. There is a thread where they switch the hubs to opposite side of cart and that puts the bracket on the top. I am thinking I will do it but haven't gotten around to it yet. Also like you said, longer cables are an option.
|
06-15-2015, 12:08 PM | #3 |
Gone Wild
Join Date: Apr 2015
Location: Athens, GA
Posts: 349
|
Re: Brake cable replacement after installing lift
My biggest concern would be if I go off-roading where something could catch the cable but at the moment, don't think this would be an issue. Between reversing brake sides or going with a longer cable, I'd opt for the longer cable and keep the other stuff intact.
|
06-16-2015, 08:45 AM | #4 |
Gone Wild
Join Date: Apr 2010
Location: West Tennessee
Posts: 1,269
|
Re: Brake cable replacement after installing lift
Not sure why they wont reach? Mine reach on a 6" lift CC DS
|
06-16-2015, 09:51 AM | #5 |
Gone Wild
Join Date: Apr 2015
Location: Athens, GA
Posts: 349
|
Re: Brake cable replacement after installing lift
They are reaching but I had to remove from the clip that was underneath the spring hanger. Don't know if it's the original cables or how long the OEM cables were from the factory.
BTW, I finally got the lift installed but haven't made the final adjustments yet. Figure on waiting until I get the new tires/wheels to do that. |
06-16-2015, 04:45 PM | #6 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Brake cable replacement after installing lift
On both of my DS's, the cable hangers went in the trash!
Yep, the cables seem to hang fairly low, and you'd "think" something might catch on them, But to be honest? I've taken my gasser through some pretty grown out woods, (crawling over fallen branches and small logs) and never really worried about it! now, granted... I've taken a few branches home with me, but they were usually stuck in the front lift area! Just my experience! |
06-17-2015, 11:53 AM | #7 |
Gone Wild
Join Date: Apr 2015
Location: Athens, GA
Posts: 349
|
Re: Brake cable replacement after installing lift
Lockman, I think I'll do what you did, throw the clips away and let them hang, I don't plan on off-roading anyway. If they rip off, I'll deal with it then. Thanks,..
|
06-17-2015, 12:56 PM | #8 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,928
|
Re: Brake cable replacement after installing lift
|
06-17-2015, 01:01 PM | #9 |
Cave Dweller
Join Date: Apr 2013
Location: Always On The Move
Posts: 22,217
|
Re: Brake cable replacement after installing lift
mine hung below the clips also but I took a tie wrap around the clip and the cable just to make a clip extension
|
06-17-2015, 01:09 PM | #10 |
Gone Wild
Join Date: Feb 2015
Location: Mi
Posts: 492
|
Re: Brake cable replacement after installing lift
I eventually want to do the brake flip but untill then i just zip tied it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
club car precedent lift kit/brake cable problem | Electric Club Car | |||
89 DS Brake Cable Replacement | Gas Club Car | |||
Brake cable snapped, disc brake conversion? | Electric EZGO | |||
club car villager 8 after lift kit driver's side brake cable to short | Electric Club Car | |||
Emergency Brake Cable Replacement | Gas EZGO |