06-29-2016, 01:04 PM | #1 |
Gone Wild
Join Date: Apr 2015
Location: Florida
Posts: 203
|
Rear spacers after lift
My RXV has a 6" spindle lift and I want to get the rear tires out to match the fronts. What size spacer will get it pretty close? I'm thinking a 2" but I don't want it to stick out too much. If anyone has pics that would be great.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-29-2016, 01:32 PM | #2 |
Gone Wild
Join Date: Apr 2016
Location: Greenwood, SC
Posts: 1,291
|
Re: Rear spacers after lift
Measure the track width of your front tires to the outside edge and the rears the same way subtract the back from the front then device that number by 2 and that's the size spacer you need????
Example if your front tires measure 50"s from outside to outside and the rears measure 48" you subtract 48 from 50 and have a 2 inch difference. Half that number and you get 1 so you need 1" spacers to equal the same width since you increase the width 1" on each side. |
06-30-2016, 10:54 AM | #3 | |
Gone Wild
Join Date: Apr 2015
Location: East Coast Central Florida
Posts: 474
|
Re: Rear spacers after lift
Quote:
|
|
07-01-2016, 08:16 AM | #4 |
Gone Wild
Join Date: Apr 2015
Location: Florida
Posts: 203
|
Re: Rear spacers after lift
Thanks I'll give that a go.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Jakes 6" spindle lift and rear wheel spacers | Electric EZGO | |||
G2 cheap lift or spacers | Gas Yamaha | |||
G14 Rear End Spacers? | Gas Yamaha | |||
175/50-13 Tires no lift. Do I need spacers? | Electric Club Car | |||
Lift Kit vs. Spacers | Gas EZGO |