Snow plow with Jakes long travel lift. Ezgo txt

pastor@southwestbaptist.o

I am looking to get a long travel lift. But I also want to mount a snow plow. Anyone have any suggestions or ideas. If the long travel lift will be too challenging , then I will just stick with a standard drop axle or something .

2000 txt electric

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Hypersprint

I'm not sure how the plow is setup to mount but the Jakes Long Travel has a 2" receiver built into it, if that would help

Rob

pastor@southwestbaptist.o

What about putting a winch on a jakes long travel. Is there a kit or ideas for that. Maybe I can modify a plow to fit the receiver....as long as the receiver is strong enough

Hypersprint

I will get a pic of how I mounted my winch tomorrow. I use the receiver to move utility trailers around and I have a piece of 2 x 2 square tube that I welded on a D-Ring that I use all the time with a snatch strap for pulling out everything from golf carts to side by sides as well as getting used to pull me out of trouble.

Hypersprint

Here are a couple pics of the winch. one shows how I welded on a couple pieces of angle and mounted the roller to the front bumper that comes with the lift and the other pic is how I mounted the winch using the mounting plate that came with it but used the side that the roller would normally bolt to to bolt it directly to the lift and I didn't worry about the mount bending a bit to find its happy place.

Attached Images

	20160718_144946.jpg (193.9 KB, 0 views)
	20160718_144957.jpg (195.4 KB, 0 views)

pastor@southwestbaptist.o

Thanks hypersprint