|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
06-04-2017, 06:03 PM | #1 |
Not Yet Wild
Join Date: May 2015
Location: Oklahoma
Posts: 1
|
Jake's 7" lift technical questions.
Hi all,
So just went from a G5 6" lift to a G14 7" double a arm lift, and see now that I have a learning curve to address, so thought it best to lean on the community to bring me up to speed. The belt seems to be to long now, what is the correct size to use, when you install the Full Power Kit? The cart now has a hard rake stance, what are the options to level the cart? Is the oil level affected at all using this kit in a raked stance or leveled? HD springs are going in the rear. It'll run on 25"x 10" x 12" steely's with 1" spacers front and rear we picked up from a local golf cart shop. They stated the wheels and tires came from a Polaris ATV or UTV they were not sure. Any help with the questions posed above would be greatly appreciated, and I'm sure the community would be helped as well, because I searched the pages up to 110, and only found one post, in where roosterracing stated he cut an inch of the rear shock tower bar, to take the rake down to 1/2", but this was back in 2013, hopefully there has been someone else in the last 4 years that has come up with a new mod, or workaround, not really wanting to cut on the new lift, but would not mind fabricating parts to level it. Thanks in advance! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone run 25" tires on an RXV W/ 6" Jake's spindle lift | Lifted Golf Carts | |||
G16 Clutch Swap and "Hot Setup" questions (technical) | Gas Yamaha | |||
Questions on Jake's lift on G2 | Gas Yamaha | |||
WTT Jake's 6" spindle lift for a 3" | Golf Carts and Parts |