03-06-2018, 02:40 PM | #1 |
Not Yet Wild
Join Date: Feb 2018
Location: FL
Posts: 44
|
Ezgo Jakes long arm alignment
Lift is installed, was waiting on new tie rod ends to show up. Well they are here and the tie rods were installed and adjusted to the shortest length possible however I’m still about 1” out on toe. Front of the tires are at 41 inches and the back of the tire is just under 42 inches.
Anybody else run into this problem, Didn’t have much time to troubleshoot today. Will grab some closeup pics tomorrow. But ill put up one i have before putting in the tie rod just to show what holes I’m using on the lift. The cart is a 98 ezgo workhorse 1200. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-08-2018, 12:34 PM | #2 |
Not Yet Wild
Join Date: Feb 2018
Location: FL
Posts: 44
|
Re: Ezgo Jakes long arm alignment
So here’s some close ups, i think if i raise the front one hole it might help, if not the only other thing i can think of is to adjust the heim joints on the a arms to push the tire out further. Or maybe i got something backwards.
|
03-08-2018, 04:54 PM | #3 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Ezgo Jakes long arm alignment
Did you adjust the inner heim joints on the control arms?
|
03-08-2018, 06:36 PM | #4 |
Not Yet Wild
Join Date: Feb 2018
Location: FL
Posts: 44
|
Re: Ezgo Jakes long arm alignment
Not yet I havent adjusted the control arms
|
03-10-2018, 07:40 AM | #5 |
Not Yet Wild
Join Date: Jan 2010
Location: Mims FL
Posts: 72
|
Re: Ezgo Jakes long arm alignment
Control area look to b adjusted all the way in. You could make them longer but that’s not a good fix. I’d cut the tie rods on both ends to get the 1-1/2 inch. Give your self a little play. They’re threaded further than needed. If not cut the end of the tie rod ball joint.
|
03-11-2018, 08:20 AM | #6 |
Not Yet Wild
Join Date: Feb 2018
Location: FL
Posts: 44
|
Re: Ezgo Jakes long arm alignment
Well I went one hole higher on the lift and went just 2.5 turns on the inside heim joints and got it aligned, then drove it around and drives straight as a arrow. Lift seems to handle real nice.
|
03-13-2018, 05:51 PM | #7 |
Getting Wild
Join Date: Nov 2013
Location: Northern, IL
Posts: 120
|
Re: Ezgo Jakes long arm alignment
What tires are those?
|
03-13-2018, 06:26 PM | #8 |
Not Yet Wild
Join Date: Feb 2018
Location: FL
Posts: 44
|
Re: Ezgo Jakes long arm alignment
|
03-14-2018, 01:30 AM | #9 |
Getting Wild
Join Date: Apr 2010
Posts: 81
|
Re: Ezgo Jakes long arm alignment
How do you adjust camber on this kit ?
|
03-14-2018, 08:48 AM | #10 |
Crazy Ole Man
Join Date: Jan 2016
Location: Owego NY
Posts: 2,758
|
Re: Ezgo Jakes long arm alignment
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Jakes long travel ezgo 01.5 and down | Golf Carts and Parts | |||
Jakes Long Travel EZGO gas medalist | Lifted Golf Carts | |||
ezgo jakes long travel ? | Lifted Golf Carts | |||
Jakes long travel question 97 ezgo | Lifted Golf Carts | |||
Jakes Long Travel EZGO | Golf Carts and Parts |