2008 ezgo txt 36v electric 6" lift

Waterfowlwidowmaker

New to the forum here and sorry if this has been gone over before. I tried searching and didn't find anything.

I just purchased a 2008 TXT 36V cart. So far I have ordered a light kit to make it street legal, converter, rear seat, and heavy duty leafs. I plan on lifting this cart.

This cart will mostly be on pavement with little hills. This is for my family to go to the neighborhood pool and go to neighbors houses.*

I have a set of 25x10x12 Bearclaws on 4x4 rims that will mount on this cart. I would love to be able to use these tires/rims so I don't have to purchase new ones. The rims have a 5/2 spacing to them. If I ordered a 5" drop axle or 6" spindle lift, would these fit under the cart?

Also will the cart with a stock motor be able to turn this size tire under the stated the conditions?

Thank you
Chris

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

StoveBolt

I'm going with No and No.

ndhill1976

I had a 36v EZGO with a 6" lift and 23" tires. It never burned out, but it really struggled on hills. I would go with a 3" lift and 18" tires max if I were you.
Or upgrade electronics.

Waterfowlwidowmaker

Did you have any upgrades to your electronics? For the PDS I know I can get one of those more torque plugs.

ndhill1976

I just dealt with it till the batteries died and then converted to 48 volt and replaced the motor and controller, etc.