What size block

hammer322

Hi I have a 1995 gas club car . What is the largest size block that I can put between the front leaf spring and the frame . ( the bolts you see are just temporary) I have a 2 1/2 inch block there now . Would like to replace with a 4 inch . Then flip the a arms over to move the wheels out a few inches . If I can do that I don't think I need a lift . as you can see in the pics there is plenty of room at the front tires, the back tires also have plenty of room I still have to put the rear blocks on which will give it a little more space . Thanks Jim

Attached Images

	front spacer.jpg (34.2 KB, 66 views)
	front tire.jpg (33.4 KB, 39 views)
	rear leaf spring.jpg (30.9 KB, 55 views)
	rear tire.jpg (33.7 KB, 33 views)

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

scottyb

shock:
I didn't know you could do any of that

dirtysouth

hammer, You can use a 1" block between the frame and leaf spring. If you go any more than that, you will have excessive negative camber ( tires lean in at the top ) and I don't know how you would hook up the drag link ( Long tie rod from wheel to wheel ) without frame interference... You would also have trouble with the short link from the rack and pinion. Or I could be completely wrong... Good Luck... Keep the pics rollin' our way.