12-24-2018, 01:30 PM | #1 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
1995 Medalist transformation
Here are some pics of the transformation of my 1995 medalist. I got the cart at the end of September for free, but it was not running, a wiring mess and it had no batteries. I knew I wanted it strictly for hunting and I already had ideas of what I was going to do. Thanks to this site and it's members, I was able to turn a non running golf cart into a nice hunting cart.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-24-2018, 01:35 PM | #2 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
I installed a 6" lift kit, a new shock cover I made myself and The original wood for the seat was shot, so I cut a new piece out of 3/4" pressure treated plywood, painted it and made some new black seat covers.
|
12-24-2018, 01:42 PM | #3 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
I installed some new 22" tires and rims and started the camo wrap process.
|
12-24-2018, 01:52 PM | #4 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
next was the new controller mount, new controller and solenoid and install of the reversing contactor
|
12-24-2018, 01:54 PM | #5 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
Then the wiring up of all the components.
|
12-24-2018, 01:59 PM | #6 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
A good friend of mine gave me four 12v 75 AH batteries, so I needed to fabricate a new battery tray that I could just bolt in so I could remove it if necessary.
|
12-24-2018, 02:03 PM | #7 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
Finally found the front cowl piece and started installing fender flares and the new fwd/rev switch and digital volt meter.
|
12-24-2018, 02:09 PM | #8 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
Then I made a new switch plate for my rocker switches and my FN1 and installed a new 12" light bar.
|
12-24-2018, 02:19 PM | #9 |
Gone Wild
Join Date: Sep 2018
Posts: 791
|
Re: 1995 Medalist transformation
Cart is running great now and I'll post more pics as I do more. Windshield and clays cart are on order and will be installed soon. Thanks for looking
|
12-25-2018, 01:06 AM | #10 |
Gone Wild
Join Date: Feb 2009
Location: Sanger, Ca.
Posts: 1,689
|
Re: 1995 Medalist transformation
Very nice.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
1995 Medalist windshield? | Electric EZGO | |||
Looking for the correct tie rod end 1995 Medalist | Electric EZGO | |||
1995 E-Z-GO Medalist | Electric EZGO | |||
My 1995 Medalist DCS | Electric EZGO | |||
1995 DCS medalist won't go | Electric EZGO |