‘89 Club project build

Peel Archers · 02-27-2019, 01:01 AM

Hey guys, Finally finished the build of the cart to be our club utility vehicle. Being in Australia the cost of most gear is way overprotective ced and hard to get hold of. I went about and did all the lift kit myself. Overall I think I got close to a 6” lift. Then it came to the wheels and tyres. Again the cost of a sub standard larger tire to fit the stock wheels was too high, ended up order a set of 10” alloys with an aggressive all terrain tyre for $500 US dollars delivered to my door. . All up it was built for about $1800 AUD. It also runs a 13 HP clone petrol engine.

Brob1969 · 02-27-2019, 07:26 AM

Nice looking cart! Good work.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Peel Archers · 02-27-2019, 07:41 AM

Thanks, it took some serious pushing of the brain to work the lift out, but I got there, the bar work is made from an old trampoline frame and a bit of plate. It also has a 85 amp alternator to allow us to run a few LED lights for working at night. Top speed is about 30 mph, climbs some pretty big hills very easily.

MILLERTIME · 02-27-2019, 11:40 PM

Looking good.

Mooncarter · 02-27-2019, 11:51 PM

Nice!

BBBHC · 02-28-2019, 07:16 AM

Good work! That's a nice looking ride you got there. What is that you have attached on the driver side, on the rear body?

Peel Archers · 02-28-2019, 07:19 AM

Moved the gear selector to the side. That way I am not playing with anyone’s legs when driving around the course.

BBBHC · 02-28-2019, 08:30 AM

Quote:

Originally Posted by Peel Archers

Moved the gear selector to the side. That way I am not playing with anyone’s legs when driving around the course.

Well now, that's a cool idea! Can you post a picture of the placement on the inside? I'd be interested to see how you routed and placed the mechanicals.

Peel Archers · 02-28-2019, 09:11 AM

I removed the original mechanism, modified to the bracket that holds the cable so I could mount it on the outside and made my own stick shifter to suit, forwards goes forward and backwards is reverse.

TheNewGuy · 03-04-2019, 06:26 AM

Nice job!!

02-27-2019, 07:26 AM	#2
Brob1969 Gone Wild Join Date: Feb 2019 Location: North Florida Posts: 271	Re: ‘89 Club project build Nice looking cart! Good work. Sent from my SAMSUNG-SM-G870A using Tapatalk

02-27-2019, 07:41 AM	#3
Peel Archers Not Yet Wild Join Date: Nov 2018 Posts: 6	Re: ‘89 Club project build Thanks, it took some serious pushing of the brain to work the lift out, but I got there, the bar work is made from an old trampoline frame and a bit of plate. It also has a 85 amp alternator to allow us to run a few LED lights for working at night. Top speed is about 30 mph, climbs some pretty big hills very easily.
Peel Archers Not Yet Wild Join Date: Nov 2018 Posts: 6

02-27-2019, 11:40 PM	#4
MILLERTIME Gone Wild Join Date: Feb 2009 Location: Sanger, Ca. Posts: 1,689	Re: ‘89 Club project build Looking good.

02-27-2019, 11:51 PM	#5
Mooncarter Gone Insane Join Date: Oct 2016 Location: Richmond, VA Posts: 14,214	Re: ‘89 Club project build Nice!

02-28-2019, 07:16 AM	#6
BBBHC Gone Wild Join Date: Jul 2018 Location: Central Ohio Posts: 1,720	Re: ‘89 Club project build Good work! That's a nice looking ride you got there. What is that you have attached on the driver side, on the rear body?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-28-2019, 07:19 AM	#7
Peel Archers Not Yet Wild Join Date: Nov 2018 Posts: 6	Re: ‘89 Club project build Moved the gear selector to the side. That way I am not playing with anyone’s legs when driving around the course.
Peel Archers Not Yet Wild Join Date: Nov 2018 Posts: 6

02-28-2019, 09:11 AM	#9
Peel Archers Not Yet Wild Join Date: Nov 2018 Posts: 6	Re: ‘89 Club project build I removed the original mechanism, modified to the bracket that holds the cable so I could mount it on the outside and made my own stick shifter to suit, forwards goes forward and backwards is reverse.
Peel Archers Not Yet Wild Join Date: Nov 2018 Posts: 6

03-04-2019, 06:26 AM	#10
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,047	Re: ‘89 Club project build Nice job!!
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

Similar Threads
Thread	Forum
TXT Build and new G1 Project Cart	Lifted Golf Carts
2005 G22 build/project	Lifted Golf Carts
Project Build Need Opinions	Electric Club Car
Not just another build! 89 parcar project	Gas Columbia ParCar
g16 project build	Electric Yamaha