10-23-2019, 08:03 AM | #1 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
07 Umax lift
Anybody know what kind of factory lift Yamaha offered back in 07 info is vague . Found some wheels and tires I want to run but not sure if they will fit
14" Vortex Wheel and 23 x10x14 All Terrain Tire Combo (Set of 4) Lugnuts Included. https://www.amazon.com/dp/B07PZF1FHJ..._wq.PDb73Q8TK8 If the tires don’t fit need to know what my options are for a lift. I’m new to golf cart world just FYI ... but the g16 g19 kits seems like it might work. I’ve called around nobody carries a lift for the Umax |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-23-2019, 08:06 AM | #2 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
Re: 07 Umax lift need help
Here is picture.. keep in mind tires are flat
|
10-23-2019, 05:13 PM | #3 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,421
|
Re: 07 Umax lift need help
I wouldn't think there is an aftermarket lift if it came from the factory like that. Can you post a few pics of the suspension from underneath?
What size tires and wheels are on it now? Also consider the wheel offset on the new wheels. If they stick out more you may have contact between the front tires and the frame when at full lock. |
10-23-2019, 07:24 PM | #4 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
Re: 07 Umax lift need help
Currently it has done 22in duro tires on a 10in rim
|
10-23-2019, 07:29 PM | #5 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
Re: 07 Umax lift need help
Here is the rear
|
10-25-2019, 11:06 PM | #6 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
Re: 07 Umax lift need help
Some more pics
|
10-26-2019, 12:20 AM | #7 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
Re: 07 Umax lift need help
Tire size is 22x12x10
|
10-26-2019, 08:44 AM | #8 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: 07 Umax lift need help
it already has a factory lift. Don't see why a 23 inch tire wouldn't work, since you already have 22's. It's only 1 inch.
|
10-26-2019, 08:28 PM | #9 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,433
|
Re: 07 Umax lift need help
Those came lifted, not sure where the lift was from or if Yamaha made it. Yeah they should fit that is half inch on each side of tire so not much. Check your offset its edge of rim to mount surface, stock cart is 3.5 each while aftermarket usually have 2 inside and 5 outside I think.
|
10-28-2019, 07:28 PM | #10 |
Not Yet Wild
Join Date: Jul 2019
Posts: 27
|
Re: 07 Umax lift
Back spacing is about 4in going to pull the trigger and buy them thanks guys
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
07 Umax Vc 625 build | Big Block Talk! | |||
WTB Umax parts G21 | Golf Carts and Parts | |||
lift kit for a umax medium duty | Gas Yamaha | |||
Umax Value? | Gas Yamaha | |||
Build a Umax | Gas Yamaha |