do atv wheels fit?

lvaubel

does anybody know what four wheeler rims will bolt up to a ez go?
I know there are some out there that i could pick up cheaper than a custom set made for golf carts. Please post some pictures.

BGW

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Mtbr41

There are many different bolt patterns, measure yours(probably 4 on 4), and check out some qua rims see if they/some are the same. My rims on my cart and quad are different, it all depends I think

Loud & Lifted

Depends on the offset also.

jdinville3

lol well depends on the brand of quad....

I'm using quad rims on mine... I have way too many sets laying around.... What i did was very carefully redrilled the rim to fit the 4on4 bolt pattern of a golf cart. They used to be 4/110 bolt pattern so it can be done it's just a matter of how you do it.

If you trust your work then you can do it. I just pulled the rear hub/drum off and centered it up on the rim and marked my new holes. I tapped them with a center punch then proceeded with a small drill bit up to the 1/2" drill bit for the wheel studs to fit thru..

Good luck

WickedCarts

polaris quad rear wheel is the 4 0n 4 lug pattern... we have cart wheels and tires new starting at $360.00 mounted ,caps and lugs for lifted carts

yzeffer

ITP makes a steel rims that fit that are for a Polaris. I just got a set for $166. If you look in the big block forum under opposed 18hp in G9 I took a pic of the rims and its on there. They are ITP Delta steel rims 12x7 2+5 offset 4/4.

WickedCarts

we have those
too.

ruredy

Some of the Polaris rims are 4 on 4. These are great on carts, i've been running them for years. they have a great offset that eliminates the need for spacers. I run them on my cart. beware of steel rims that claim to be the same, most don't have the same width and or offset.

pizzamaker

samething for me, this polaris rim is a 10x8.5 with a deep offset! there on e-bay for 10 or 20 bucks.

ruredy

yours are the factory aluminum ones, the ones I have are steel. you can tell by the slots in them which is which. They also had some (factory) with no slots but all the ones I've come across like that are steel.