cool my lift kit is here

pbillyi69 · 07-02-2009, 03:20 PM

finally my lift kit is here 6" SS Allsports i've been anticipating it now that it is here it's so freakin hot outside i don't know if i can stand laying on the ground to put it on..

im going to try the ground is about 140 degrees

Nubs · 07-02-2009, 03:24 PM

cool, is it done yet

essness · 07-02-2009, 03:37 PM

How about now?

pbillyi69 · 07-02-2009, 03:42 PM

not yet *** the ground is f-in hot.... how far forward is to far to jack my cart up high enough to do the rear???? from what i can see the first point to place the jack stands where im comfortable that they wont slip seems like it is going to be too far creating a teedering point??

essness · 07-02-2009, 03:47 PM

Quote:

Originally Posted by pbillyi69

not yet *** the ground is f-in hot.... how far forward is to far to jack my cart up high enough to do the rear???? from what i can see the first point to place the jack stands where im comfortable that they wont slip seems like it is going to be too far creating a teedering point??

Yea, that doesnt go well

I had the same problem with my workhorse, so I jacked the whole thing up.

Nubs · 07-02-2009, 03:50 PM

Quote:

Originally Posted by essness

Yea, that doesnt go well

I had the same problem with my workhorse, so I jacked the whole thing up.

i hear that! i like to lift up the whole thing to

scottyb · 07-02-2009, 03:56 PM

My digital thermometer is reading 99.9* glad it is under 100*

On a CC put the jack stands on cross member at the rear of the battery boxes. Just where the I beam frame curves up you will see a spot for the jack. Careful not to pinch the break cables.....

pbillyi69 · 07-02-2009, 03:58 PM

ya but jack the whole thing up there still needs to be a place to put the stands in the back and take the springs out i think i found a place where the stands won't be in the way i hope it gonna tick me off if i get stuff unbolted and find out that they are in the way to get the front leafspring bolts out..

pbillyi69 · 07-02-2009, 04:00 PM

Quote:

Originally Posted by scottyb

My digital thermometer is reading 99.9* glad it is under 100*

On a CC put the jack stands on cross member at the rear of the battery boxes. Just where the I beam frame curves up you will see a spot for the jack. Careful not to pinch the break cables.....

that is where i started to put them but it seemed like was going to teeder when i let the jack down maybe me just being too cautious?? should mention this is my gas cart 91

Nubs · 07-02-2009, 04:16 PM

boy, not done... i'll check back in a 1/2 hr

07-02-2009, 03:20 PM	#1
pbillyi69 shut up & hang on Join Date: Jun 2009 Location: gladstone, or Posts: 1,170	cool my lift kit is here finally my lift kit is here 6" SS Allsports i've been anticipating it now that it is here it's so freakin hot outside i don't know if i can stand laying on the ground to put it on.. im going to try the ground is about 140 degrees

07-02-2009, 03:24 PM	#2
Nubs Gone Wild Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,406	Re: cool my lift kit is here cool, is it done yet

07-02-2009, 03:37 PM	#3
essness WOOT! WOOT! pfft! Join Date: Oct 2008 Location: Near Lake Geneva, WI Posts: 7,920	Re: cool my lift kit is here How about now?

07-02-2009, 03:42 PM	#4
pbillyi69 shut up & hang on Join Date: Jun 2009 Location: gladstone, or Posts: 1,170	Re: cool my lift kit is here not yet *** the ground is f-in hot.... how far forward is to far to jack my cart up high enough to do the rear???? from what i can see the first point to place the jack stands where im comfortable that they wont slip seems like it is going to be too far creating a teedering point??

07-02-2009, 03:56 PM	#7
scottyb golf cart enthusiast Join Date: Dec 2007 Location: So Cal Posts: 21,877	Re: cool my lift kit is here My digital thermometer is reading 99.9* glad it is under 100* On a CC put the jack stands on cross member at the rear of the battery boxes. Just where the I beam frame curves up you will see a spot for the jack. Careful not to pinch the break cables.....

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-02-2009, 03:58 PM	#8
pbillyi69 shut up & hang on Join Date: Jun 2009 Location: gladstone, or Posts: 1,170	Re: cool my lift kit is here ya but jack the whole thing up there still needs to be a place to put the stands in the back and take the springs out i think i found a place where the stands won't be in the way i hope it gonna tick me off if i get stuff unbolted and find out that they are in the way to get the front leafspring bolts out..

07-02-2009, 04:16 PM	#10
Nubs Gone Wild Join Date: Jun 2008 Location: waldo,wisconsin Posts: 5,406	Re: cool my lift kit is here boy, not done... i'll check back in a 1/2 hr

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
What would be cool	Electric EZGO
This is cool!	Gas EZGO
Another very cool vid	Videos
Very cool vid	Videos