|
12-17-2009, 04:54 PM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2009
Posts: 2
|
Help installing lift kit
I need some help. I'm trying to install a lift kit on my golf cart. Looks pretty straight forward. I'm removing the front a-arms and i'm having trouble removing the king pins from the knuckles. Is there a pin holding them in? There is a hole going through them that actually looks like a sleeve. Do i need to drive that out with a punch? Any help would be great.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-17-2009, 04:56 PM
|
#2 | |
|
Gone Wild
Join Date: Jun 2008
Location: LINWOOD, MI
Posts: 1,362
|
Re: Help installing lift kit
Quote:
 |
|
|
|
|
|
12-17-2009, 04:59 PM
|
#3 |
|
Not Yet Wild
Join Date: Dec 2009
Posts: 2
|
Re: Help installing lift kit
So if i understand right there is a small pin going through the kingpin holding it in the knuckle? i just drive that out and drive the kingpin out with a punch also?
|
|
|
|
|
12-17-2009, 07:55 PM
|
#4 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Help installing lift kit
After you pull the bolt out the bronze sleeve should just slide out and spindle will come off. No pins holding it.
If it don't slide out you might have to tap it out, use something like a small piece of wood dowel so you don't injure the sleeve. |
|
|
|
|
12-17-2009, 08:18 PM
|
#5 |
|
Raised by coyotes
 Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Help installing lift kit
Maybe I'm out of line here, but my Yamaha had pins that had to be driven out. What make year model are you working on?
|
|
|
|
|
12-17-2009, 08:23 PM
|
#6 |
|
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Help installing lift kit
Nope I'm out of line (read it again where he said removing A arms) thought it was an ezgo... my bad.
|
|
|
|
|
12-17-2009, 08:30 PM
|
#7 |
|
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Help installing lift kit
That's why things are discussed! I thought various makes may be different....not an expert by a long shot!
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Need help with installing lift kit! | Lifted Golf Carts | |||
| installing big block | Big Block Talk! | |||
| Installing new controller | Electric EZGO | |||
| Installing Jake's 4" Lift Kit | Gas EZGO | |||
| Question on installing my lift kit | Gas EZGO | |||
Linear Mode
