lift 01 ezgo limo

pansser · 12-31-2009, 09:11 PM

what a bleedin' nightmare!!!!

the front went in fine in less than 45 mins. moved to the back and everything went to hell in a handbasket!!! this is a factory limo and therefore has a heavy duty rear end? the whole ebrake system is directly above the spring mounts!! to install the standard rear lift blocks i had to remove all the ebrake levers and cut away the mounts for the cables!!! guess my plan for this weekend will be to swap the backing plates from left to right with the whole unit turned upside down. this should allow me to run the cables forward after i build mounts to hold them. either that or just go to a disk brake system right now $$$$. i want to get it street legal before i go too crazy on it.

LostHusker · 12-31-2009, 10:45 PM

Pics!!!!!?

mikesmotortoys · 12-31-2009, 10:48 PM

What kit did you use? We've added lifts to MANY Shuttles with no problem. Of course, I only use the OEM lift...

The only carts where we have had to switch brake assemblies and mounts on are Workhorse 1200 models...

pansser · 12-31-2009, 11:12 PM

manufactured by ezgo. the backing plate has two slots that arms protrude out of, they link together abover the axel and are operated by the e brake cable coming from the e brake lever mounted between the two frt. seats. pics in am.

LostHusker · 12-31-2009, 11:14 PM

mikesmotortoys · 12-31-2009, 11:15 PM

OK - you have the industrial shuttle then? I've never lifted one of those with the seperate emergency brake...

PICS!!!!!

Xtreme Cartz · 01-01-2010, 01:56 AM

Didn't Wicked lift a limo with an e-brake? I thought it was his purple one. Maybe he would have some pointers for you.

wakebordlf · 05-06-2010, 04:28 PM

I have a 5 lug Shuttle as well can you give me any pointers on doing the lift?

WickedCarts · 05-06-2010, 05:32 PM

Thanks Xtreme we made a custom rear lift and it was a paint in the *** but we did it

heres the thread on it

http://www.buggiesgonewild.com/membe...ld-48volt.html

12-31-2009, 09:11 PM	#1
pansser ZONE FREE ZONE Join Date: Nov 2009 Location: lauderdale by the sea Posts: 571	lift 01 ezgo limo what a bleedin' nightmare!!!! the front went in fine in less than 45 mins. moved to the back and everything went to hell in a handbasket!!! this is a factory limo and therefore has a heavy duty rear end? the whole ebrake system is directly above the spring mounts!! to install the standard rear lift blocks i had to remove all the ebrake levers and cut away the mounts for the cables!!! guess my plan for this weekend will be to swap the backing plates from left to right with the whole unit turned upside down. this should allow me to run the cables forward after i build mounts to hold them. either that or just go to a disk brake system right now $$$$. i want to get it street legal before i go too crazy on it.

12-31-2009, 10:45 PM	#2
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: lift 01 ezgo limo Pics!!!!!?

12-31-2009, 10:48 PM	#3
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: lift 01 ezgo limo What kit did you use? We've added lifts to MANY Shuttles with no problem. Of course, I only use the OEM lift... The only carts where we have had to switch brake assemblies and mounts on are Workhorse 1200 models...
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

12-31-2009, 11:12 PM	#4
pansser ZONE FREE ZONE Join Date: Nov 2009 Location: lauderdale by the sea Posts: 571	Re: lift 01 ezgo limo manufactured by ezgo. the backing plate has two slots that arms protrude out of, they link together abover the axel and are operated by the e brake cable coming from the e brake lever mounted between the two frt. seats. pics in am.

12-31-2009, 11:14 PM	#5
LostHusker Just one day at a time Join Date: Sep 2009 Location: South TX Posts: 8,650	Re: lift 01 ezgo limo

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-31-2009, 11:15 PM	#6
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: lift 01 ezgo limo OK - you have the industrial shuttle then? I've never lifted one of those with the seperate emergency brake... PICS!!!!!
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

01-01-2010, 01:56 AM	#7
Xtreme Cartz The Fabricator Join Date: Dec 2006 Posts: 2,016	Re: lift 01 ezgo limo Didn't Wicked lift a limo with an e-brake? I thought it was his purple one. Maybe he would have some pointers for you.

05-06-2010, 04:28 PM	#8
wakebordlf Not Yet Wild Join Date: May 2010 Posts: 1	Re: lift 01 ezgo limo I have a 5 lug Shuttle as well can you give me any pointers on doing the lift?
wakebordlf Not Yet Wild Join Date: May 2010 Posts: 1

05-06-2010, 05:32 PM	#9
WickedCarts NOT a Sponsor Join Date: Jan 2009 Location: So CAL Posts: 2,147	Re: lift 01 ezgo limo Thanks Xtreme we made a custom rear lift and it was a paint in the *** but we did it heres the thread on it http://www.buggiesgonewild.com/membe...ld-48volt.html

Similar Threads
Thread	Forum
What lift kit for Club Car Villager 8 Limo?	Lifted Golf Carts
EZGO Workhorse 6 PASSENGER limo Setup for Briggs,Honda or Ezgo Motor	Golf Carts and Parts
EZGO Limo	Golf Carts and Parts
g-9 limo engine and lift	Gas Yamaha
EZGO Limo for sale	Golf Carts and Parts