I need one inch

cinder · 03-07-2010, 09:00 PM

Don't we all. I have a 97 EZ GO that has a lift. It has a bit of a lean towards the front and I want to level it out a bit. Is there a way to raise the front an inch with out getting a new lift kit. Let me know if more info is needed to answer the question. Thanks

Flintrock · 03-07-2010, 09:16 PM

I'm gonna bump this up for the experts, but sounds like you got a weak component somewhere.......in your suspension.

mikesmotortoys · 03-07-2010, 09:19 PM

We have a leveling kit that may help...

cinder · 03-07-2010, 09:25 PM

Quote:

Originally Posted by mikesmotortoys

We have a leveling kit that may help...

PM me the info please.

StoveBolt · 03-08-2010, 07:23 AM

1" blocks btwn the rear of the front springs and the body.. a couple pieces of square tubing and longer bolts work good.

ruredy · 03-08-2010, 07:50 AM

If it has a drop axle then moving the springs to the top on the front axle is what you need to do. 6 bolts and nuts and a couple shock extention from napa is about all you need to do that.

DoubleTake · 03-08-2010, 09:54 AM

Quote:

Originally Posted by StoveBolt

1" blocks btwn the rear of the front springs and the body.. a couple pieces of square tubing and longer bolts work good.

I did this, I have the factory EZGO drop axle lift. I used a 3" long piece of 1 1/4" x 1 1/4" solid square stock with 3/8" hole drilled in each for the rear bolt to go through where the leaf springs bolt through the body. You will need this and 3" x 3/8" grade 8 bolts when you put the lift blocks between the springs and body. Hope that helps.

cinder · 03-08-2010, 07:40 PM

Thanks for all of the great input. I will try some of the ideas listed here and post the results. Thanks again.

03-07-2010, 09:00 PM	#1
cinder Getting Wild Join Date: Oct 2009 Location: Charleston, SC Posts: 87	I need one inch Don't we all. I have a 97 EZ GO that has a lift. It has a bit of a lean towards the front and I want to level it out a bit. Is there a way to raise the front an inch with out getting a new lift kit. Let me know if more info is needed to answer the question. Thanks

03-07-2010, 09:16 PM	#2
Flintrock Raised by coyotes Join Date: Nov 2008 Location: Central Texas Posts: 5,658	Re: I need one inch I'm gonna bump this up for the experts, but sounds like you got a weak component somewhere.......in your suspension.

03-07-2010, 09:19 PM	#3
mikesmotortoys Gone Wild Join Date: Mar 2008 Location: Rockwall, Texas (Dallas / Ft. Worth) Posts: 7,077	Re: I need one inch We have a leveling kit that may help...
	www.MIKESMOTORTOYS.com www.EZGOPARTSONLINE.com Factory EZGO - Bad Boy Buggy - Dixie Chopper Mowers

03-08-2010, 07:23 AM	#5
StoveBolt Gone Wild Join Date: Feb 2008 Location: Brooklyn, Michigan "Home of M.I.S." Posts: 3,667	Re: I need one inch 1" blocks btwn the rear of the front springs and the body.. a couple pieces of square tubing and longer bolts work good.

03-08-2010, 07:50 AM	#6
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: I need one inch If it has a drop axle then moving the springs to the top on the front axle is what you need to do. 6 bolts and nuts and a couple shock extention from napa is about all you need to do that.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-08-2010, 07:40 PM	#8
cinder Getting Wild Join Date: Oct 2009 Location: Charleston, SC Posts: 87	Re: I need one inch Thanks for all of the great input. I will try some of the ideas listed here and post the results. Thanks again.

Similar Threads
Thread	Forum
Wanted - 12 or 14 inch wheels and 22 inch tires	Golf Carts and Parts
I would like to buy some 12 inch rims	Golf Carts and Parts
11 inch rims	Members Rides
12 inch tires	Golf Carts and Parts
1 inch to 1.5 inch pipe expander	Design Center