|
| |||||||
| Lifted Golf Carts Off-Road Golf Carts. |
  |
| | Thread Tools | Search this Thread | Display Modes |
07-06-2010, 01:01 PM
| #1 |
| Not Yet Wild  Join Date: May 2009 Location: Cumming GA
Posts: 10
|  Home made lift kit?? Has anyone ever tried to make a homemade lift kit with just like longer bolts. i dont want to spend more than like 40 bucks as im on a VERY tight budget. i just want a good 2-3 inches. |
|  |
 Today
| |
 Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
|
07-06-2010, 04:33 PM
| #2 |
| Gone Wild   Join Date: Apr 2010 Location: South Texas
Posts: 196
| Re: Home made lift kit?? Yes, but you might want to include make, model and year for the best results. -SS |
|
| |
|
07-06-2010, 07:47 PM
| #3 |
| Gone Wild   Join Date: Mar 2010 Location: Eminence, IN
Posts: 533
| Re: Home made lift kit?? i built my own but i built it out of 1" plate steel and i widened the cart 4" and moved the wheels forward 3". i had the plate steel laying around and only spend like $10 in new grade 8 bolts |
|
| |
|
07-06-2010, 08:35 PM
| #4 |
| Carts Unlimited   Join Date: Dec 2007 Location: So Cal
Posts: 46,399
| Re: Home made lift kit?? There was a guy who built one with some wood blocks and longer bolts, he even posted pictures when he got done ...  |
|
| |
|
07-07-2010, 07:49 AM
| #5 |
| Not Yet Wild  Join Date: Jun 2010 Location: Southern Indiana
Posts: 24
| Re: Home made lift kit?? I looked at a CC the other day that was lifted in the front by cutting the frame about 18" from the front and dropping that front section straight down where the top of it meets the bottom of the rear section and two "Z" brackets (3/16" steel) sandwiched the frame back together with 3 bolts, front and back, each side. A brace was added from near the top center, down and out to the rear section of the frame. It looked and felt solid and had a good ride. The cart is only used to run back and forth to the mailbox or short trips at the campground; probably not much rough riding. The rear had longer shackles on oem leaf springs. gregb |
|
| |
|
07-07-2010, 08:26 AM
| #6 |
| Gone to refill cooler...  Join Date: Nov 2009 Location: Sacramento, California
Posts: 1,370
| Re: Home made lift kit?? Yes there has been a few of us that have buil thier own lift. Here are some pictures of the nine inch lift I designed and fabricated to go along with a Jake's long travel lift giving fifteen inches total suspension lift  Kelly |
|
| |
|
| ||||||
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| home made lift kit | Electric EZGO | |||
| home made tops | Gas EZGO | |||
| home made IFS | Lifted Golf Carts | |||
| Home made windshield | Lifted Golf Carts | |||
| home made posi | Design Center | |||
Linear Mode
