My FUTURE plans

4x4 CC · 01-21-2007, 10:23 PM

Plans: I have decided to get a coilover setup for the rear in my CC. I found this kit at Golf-CArt-Giant. its pretty nice and after a while i'd convert to Fox coil overs. i ALSO plan on adding a Jake's lift for the front becasue the one from Bu sucks. I tihkn ice been throuh 3 of them already. What size tires can i fit with a jakes lift??

spriddle · 01-22-2007, 08:37 AM

NICE!!!

NO NO NO E-Z-GO! · 01-22-2007, 09:18 AM

Looks great, how much will that setup cost you? I know, the lifts from that other place suck..BAD.

4x4 CC · 01-22-2007, 12:19 PM

If i can turn my motor around... i am going to get HS gears to replce the higher rpm's that the jack shaft from BU would have produced.... i then could get my independatn rear

4x4 CC · 01-22-2007, 12:19 PM

I meats to ak what HS geard do i get for my 1998 cc?

spriddle · 01-22-2007, 12:28 PM

Here's a link on Cart Parts Plus:

http://cartpartsplus.com/index.php?c...e9cb24ec820c97

wheelchairman · 01-22-2007, 04:54 PM

I dont see why they mounted the shocks behind the axle

The way their L channel bracket is setup it lowers your groundclearance on both side of the diff by about 2" it looks like.

I know when i'm offroadin and i encounter a stump i make sure not to center it up so the high part of my axle goes over it and not my diff but you would be out of luck on that setup i do believe

4x4 CC · 01-22-2007, 05:07 PM

Well i coule figure out some wat to mount them on top i guess....

wheelchairman · 08-21-2007, 06:56 PM

ever gonna buy it?

4x4 CC · 08-21-2007, 08:17 PM

Nope, Wont work with my 96 axle and engine pan...

01-21-2007, 10:23 PM	#1
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,175	My FUTURE plans Plans: I have decided to get a coilover setup for the rear in my CC. I found this kit at Golf-CArt-Giant. its pretty nice and after a while i'd convert to Fox coil overs. i ALSO plan on adding a Jake's lift for the front becasue the one from Bu sucks. I tihkn ice been throuh 3 of them already. What size tires can i fit with a jakes lift??

08-21-2007, 06:56 PM	#9
wheelchairman Pointless topic creator Join Date: Dec 2006 Location: lebanon mo Posts: 521	Re: My FUTURE plans ever gonna buy it?

08-21-2007, 08:17 PM	#10
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,175	Re: My FUTURE plans Nope, Wont work with my 96 axle and engine pan...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-22-2007, 08:37 AM	#2
spriddle b quiet Join Date: Dec 2006 Location: in the creek Posts: 8,258	NICE!!!

01-22-2007, 09:18 AM	#3
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,081	Looks great, how much will that setup cost you? I know, the lifts from that other place suck..BAD.

01-22-2007, 12:19 PM	#4
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,175	If i can turn my motor around... i am going to get HS gears to replce the higher rpm's that the jack shaft from BU would have produced.... i then could get my independatn rear

01-22-2007, 12:28 PM	#6
spriddle b quiet Join Date: Dec 2006 Location: in the creek Posts: 8,258	Here's a link on Cart Parts Plus: http://cartpartsplus.com/index.php?c...e9cb24ec820c97

01-22-2007, 04:54 PM	#7
wheelchairman Pointless topic creator Join Date: Dec 2006 Location: lebanon mo Posts: 521	I dont see why they mounted the shocks behind the axle The way their L channel bracket is setup it lowers your groundclearance on both side of the diff by about 2" it looks like. I know when i'm offroadin and i encounter a stump i make sure not to center it up so the high part of my axle goes over it and not my diff but you would be out of luck on that setup i do believe

01-22-2007, 05:07 PM	#8
4x4 CC Frog Hunter Join Date: Dec 2006 Location: Little Rock, Ar Posts: 1,175	Well i coule figure out some wat to mount them on top i guess....