Removing the split roll pin, Yam g16 Spindle

kactus · 10-27-2011, 10:47 AM

New here, So Hi everyone
Picked up a nice g16 off of craigslist last week. Ordered a 6" Jakes lift Kit. I am gonna try to put it on tonight. To avoid running into a hassel how do you remove those split roll pins that hold in the spindle shafts. It looks like I could just drive them out with a punch.

crash12888 · 10-27-2011, 10:50 AM

That is how it's done but there is actually one smaller inside the outer one. Easier to drive them out one at a time inside first.

kactus · 10-27-2011, 10:59 AM

When I first looked at it , I thought it looked like 2 pins, then I thought that it was 1 pin rolled up. Anyway, I guess it would be a good idea to stop at the parts store on the way home and buy a punch set. Thanks!!

kactus · 10-27-2011, 01:01 PM

Anything else I need to watch out for during surgery? I've looked everything over(I even read the instructions) it all seems pretty straight forward and simple.

simple man · 10-27-2011, 02:10 PM

On those roll pins, pick up a can of PB Blaster and spray them and wait an hour or so. They'll come out much easier!

Mike Mac · 11-02-2011, 11:12 PM

"Never seize" king pins and roll pins for reassembly.

10-27-2011, 10:47 AM	#1
kactus Not Yet Wild Join Date: Oct 2011 Posts: 5	Removing the split roll pin, Yam g16 Spindle New here, So Hi everyone Picked up a nice g16 off of craigslist last week. Ordered a 6" Jakes lift Kit. I am gonna try to put it on tonight. To avoid running into a hassel how do you remove those split roll pins that hold in the spindle shafts. It looks like I could just drive them out with a punch.
kactus Not Yet Wild Join Date: Oct 2011 Posts: 5

10-27-2011, 10:50 AM	#2
crash12888 Gone Crazy Join Date: Jan 2007 Location: Chesterfield, Va Posts: 6,021	Re: Removing the split roll pin, Yam g16 Spindle That is how it's done but there is actually one smaller inside the outer one. Easier to drive them out one at a time inside first.

10-27-2011, 10:59 AM	#3
kactus Not Yet Wild Join Date: Oct 2011 Posts: 5	Re: Removing the split roll pin, Yam g16 Spindle When I first looked at it , I thought it looked like 2 pins, then I thought that it was 1 pin rolled up. Anyway, I guess it would be a good idea to stop at the parts store on the way home and buy a punch set. Thanks!!
kactus Not Yet Wild Join Date: Oct 2011 Posts: 5

10-27-2011, 01:01 PM	#4
kactus Not Yet Wild Join Date: Oct 2011 Posts: 5	Re: Removing the split roll pin, Yam g16 Spindle Anything else I need to watch out for during surgery? I've looked everything over(I even read the instructions) it all seems pretty straight forward and simple.
kactus Not Yet Wild Join Date: Oct 2011 Posts: 5

10-27-2011, 02:10 PM	#5
simple man Gone Wild Join Date: Aug 2011 Location: Bunnell, Florida Posts: 2,408	Re: Removing the split roll pin, Yam g16 Spindle On those roll pins, pick up a can of PB Blaster and spray them and wait an hour or so. They'll come out much easier!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

11-02-2011, 11:12 PM	#6
Mike Mac G8 Specialist Join Date: Jun 2009 Location: Phoenix Posts: 7,799	Re: Removing the split roll pin, Yam g16 Spindle "Never seize" king pins and roll pins for reassembly.

Similar Threads
Thread	Forum
Trying to split case on G1	Gas Yamaha
in need of a roll bar	Electric EZGO
Please, I need to know how (with details) to split the case of a 2pg!!	Gas EZGO
How hard is it to split and reassemble a 2pg EZGO engine?	Gas EZGO
Split the case on a 244 Robin	Gas EZGO