07-21-2013, 07:53 PM | #1 |
Gone Wild
Join Date: Aug 2011
Posts: 408
|
marathon drop axle vs. txt
1993 marathon jakes 4" drop axle front lift vs. jakes 6" txt drop axle
from the looks of it the only difference seems to be the leaf spring mounts correct me if im wrong.because all the ez go's use the same hubs. with different spindles. sooo my question was i really want to get a 6" lift on the marathon one way or another. i dont mind buy the 6'' drop axle if the lenghts are across the axle are similar, all i would have to do would be fab new leaf spring mounts and maybe mess with the shock mounts.. if the lenghts are the same across then im gonna buy one and do it. Need some input though first though. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-22-2013, 10:11 AM | #2 |
Gone Wild
Join Date: Aug 2011
Posts: 408
|
Re: marathon drop axle vs. txt
could i at least get some some to measure the front of there jakes drop axle on a txt ?
|
07-22-2013, 10:48 AM | #3 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: marathon drop axle vs. txt
the holes on the front of the springs on a txt center to center 10"
|
07-22-2013, 11:04 AM | #4 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: marathon drop axle vs. txt
and I used an st350 axle on my txt, 6.5 lift with springs bolted on top.
http://www.nivelparts.com/pages/prod...93&c=003001001 center of spindle bolt to spindle bolt 29.5 |
07-22-2013, 11:44 AM | #5 |
Gone Wild
Join Date: Aug 2011
Posts: 408
|
Re: marathon drop axle vs. txt
Thank you very much now i just need to get someone to measure a marathon with the 4" jakes lift. im thinking there most likely very similar in length. stovebolt if you dont mind me asking would you mind measuring the "C" where the spindle fits in from the top of the c to the bottem.
|
07-22-2013, 12:15 PM | #6 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: marathon drop axle vs. txt
3.5" inside
|
07-22-2013, 01:10 PM | #7 |
Gone Wild
Join Date: Aug 2011
Posts: 408
|
Re: marathon drop axle vs. txt
okay i just measured mine its roughly 26'' give or take. looks like i need to get the axle,front spindles and possibly new tie rods .is there a away i could add lenght to the tie rods i have there has to be.
|
07-22-2013, 01:13 PM | #8 |
Gone Wild
Join Date: Aug 2011
Posts: 408
|
Re: marathon drop axle vs. txt
thinking that i could just find a pipe the same size as the tie rod and thread the inside of it and cut down to the length i need.
|
07-22-2013, 01:40 PM | #9 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: marathon drop axle vs. txt
They do make them. look at all sports site and you will see them pictured in the workhorse 1200 lift. I have bought separate parts from Steve there, wouldn't hurt to call.
Did you ever consider the 4" marathon lift and adding 2" blocks on the rear of the front springs to lift the body? or on top the axle under the springs? or 1" on both ends of the springs? might still need the extensions though. I have made blocks out of 1/8" wall square tubing, with holes drilled in the ends to except the bolts that go through the springs. |
07-22-2013, 01:52 PM | #10 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,666
|
Re: marathon drop axle vs. txt
BTW, I think all dropped axles are going to be 3" or so wider than stock axles.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Tie rod on drop axle | Lifted Golf Carts | |||
Drop axle lift | Electric EZGO | |||
87 marathon drop axle ???? | Electric EZGO | |||
drop axle | Golf Carts and Parts | |||
Drop Axle Lift Kit | Gas EZGO |