|
Lifted Golf Carts Off-Road Golf Carts. |
|
Thread Tools | Display Modes |
10-03-2013, 09:37 PM | #1 |
Not Yet Wild
Join Date: Nov 2012
Posts: 40
|
NIB All Sport Spindle lift rusted spindles
I justed ordered a all sport 6" lift for my gas ezgo txt, and the spindles shafts are rusted. Is this common? The lift was priced well compared to anything else I found online but rust on a brand new part does not make since.
Let me know what you think. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-04-2013, 05:47 AM | #2 |
72 volt torque monster
Join Date: Dec 2009
Location: Sorrento, FLA
Posts: 589
|
Re: NIB All Sport Spindle lift rusted spindles
Not a common problem, but the rust should be very light, and easily cleaned off with a piece of emery cloth,, if not then may I suggest you contact the seller.
|
10-04-2013, 06:16 AM | #3 |
Not Yet Wild
Join Date: Nov 2012
Posts: 40
|
Re: NIB All Sport Spindle lift rusted spindles
Thanks I like your avatar. I will contact Amazon and see if they offer a discount or credit.
|
10-05-2013, 09:12 AM | #4 |
Gone Wild
Join Date: Sep 2013
Location: Michigan
Posts: 385
|
Re: NIB All Sport Spindle lift rusted spindles
My Jake's 6" A-Arm kit was packaged with parts that either came from different workers at the manufacturing plant, or?
The internal threads for half (one side) of the kit were clean and oiled. One spindle shaft was clean and oiled. The other half had shavings in the threads, had a lousy tap create the threads, and no oil. One spindle shaft had a glaze of rust and no oil. I believe I'm OK after cleaning everything, but it's odd that the kit was packaged that way. Though I already said it, the instructions are horrible. And Jake's website and Youtube site do not have video's or pdf's for the Precedent installation of the A-Arm kit. It still looks boss, though! With the 23's, I only have a couple of inches of clearance to get it out of the garage! |
10-07-2013, 05:43 AM | #5 |
Gone Broke
Join Date: Oct 2011
Location: Galveston, Texas
Posts: 1,592
|
Re: NIB All Sport Spindle lift rusted spindles
it could look like this.......
ijust keep painting it......... |
10-07-2013, 08:58 AM | #6 |
Gone Wild
Join Date: Oct 2011
Location: Cowtown Texas
Posts: 180
|
Re: NIB All Sport Spindle lift rusted spindles
I'd have it powder coated.
The Jakes Long Travel kit came with a chromed lil front bumper. I don't want the blingy, shiny reflecting stuff on the cart since it's used for hunting and around the ranch. Had it powder coated black and didn't even do anything to the chrome beforehand. Powder coating can take lots of abuse. You can get a kit at Harbor Freight, and that size part should fit in the oven. Just don't let the wife find out ya did it. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
WTB Front lift spindles for 99 EZGO TXT Electric | Golf Carts and Parts | |||
Modified All Sport Spindle Lift | Electric Club Car | |||
where to find drop axle lift w/spindles | Lifted Golf Carts | |||
cheap lift kits .... loose spindles? | Lifted Golf Carts | |||
Lokking for 3" lift spindles for my 97 CC | Electric Club Car |