Jake's upper A arm question

CCVillager8 · 10-08-2013, 03:54 AM

I have 2003 Club Car Villager 8 that is our tour vehicle at work. It had a 6" spindle lift that I'm replacing with a Jake's double A arm kit. My question is, should there be a sleeve that goes inside the bushing of the A arm mount? Without it, I can rock the spindle back and forth a couple of inches. I have sent an email to Glen at Jake's so in the mean time I'll fab a sleeve and try it. To me it seems to have way to much movement but I've never work on a cart before so I don't know. Thanks

CCVillager8 · 10-08-2013, 08:32 AM

Just recieved a call from Glen, great bunch of folks, and he confirmed it needs a sleeve. Was going to send one to me asap, but I already have a 3/8 stainless tube cut and ready to go!!

Boomer1031 · 10-08-2013, 02:33 PM

good catch b on that 1 .I'm getting ready to install double a arm on 96 ds.

CCVillager8 · 10-13-2013, 07:59 AM

does any one have an idea how many hours it should take to replace the front suspension on these Club Cars??? I have about 13 hours into it....I'm thinking I took to long....just asking. Thanks

CCVillager8 · 10-13-2013, 08:07 AM

11 hours......2 hours to put the fenders on

10-08-2013, 03:54 AM	#1
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7	Jake's upper A arm question I have 2003 Club Car Villager 8 that is our tour vehicle at work. It had a 6" spindle lift that I'm replacing with a Jake's double A arm kit. My question is, should there be a sleeve that goes inside the bushing of the A arm mount? Without it, I can rock the spindle back and forth a couple of inches. I have sent an email to Glen at Jake's so in the mean time I'll fab a sleeve and try it. To me it seems to have way to much movement but I've never work on a cart before so I don't know. Thanks
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7

10-08-2013, 08:32 AM	#2
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7	Re: Jake's upper A arm question Just recieved a call from Glen, great bunch of folks, and he confirmed it needs a sleeve. Was going to send one to me asap, but I already have a 3/8 stainless tube cut and ready to go!!
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7

10-08-2013, 02:33 PM	#3
Boomer1031 Not Yet Wild Join Date: Jul 2011 Location: Chicago,Illinois Posts: 71	Re: Jake's upper A arm question good catch b on that 1 .I'm getting ready to install double a arm on 96 ds.

10-13-2013, 07:59 AM	#4
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7	Re: Jake's upper A arm question does any one have an idea how many hours it should take to replace the front suspension on these Club Cars??? I have about 13 hours into it....I'm thinking I took to long....just asking. Thanks
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7

10-13-2013, 08:07 AM	#5
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7	Re: Jake's upper A arm question 11 hours......2 hours to put the fenders on
CCVillager8 Not Yet Wild Join Date: Oct 2013 Posts: 7

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
RXV Jake's Lift Question	Lifted Golf Carts
Jake's brake question	Electric EZGO
Jake's Upper Brush Guard Top Ideas?	Lifted Golf Carts
Jake's 6" Spindle Lift Kit Question	Electric Club Car
Jake's lift front end question from Newbie, Steering	Gas EZGO