|
10-12-2008, 08:12 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2008
Location: Girard, Ohio
Posts: 37
|
EZ-GO ST350 front ?
I want to use a front axle and spindles for a ST350 to lift my TXT and the description states "3 to 5 inch lift when used to lift TXT".
The spring plates are welded to the bottom of the axle, how do you get 5" out of it? Do you mount the springs on top of the axle? If so will there be interference between the tie rods and springs? Is there special hardware to mount it on top or do you have to cut and weld the plates to the top of the axle? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-12-2008, 08:50 AM
|
#2 |
|
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: EZ-GO ST350 front ?
It'll work, The tie rods do get kinda close but it is adjustable (meaning you can tilt the axle and move the tie rods away from the springs by loosening/tightening the bolts) Heres a pic when I was setting mine up. I have the winch plate on mine which moved the tie rods and springs even closer together but you can bolt the springs right on top the axle weldment.
 [/QUOTE] |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| ST350 just stopped | Gas EZGO | |||
| ATV front end? | Lifted Golf Carts | |||
| Front end alignment help!! | Gas EZGO | |||
| Front springs | Electric EZGO | |||
| EZGO St350 parts | Golf Carts and Parts | |||
Linear Mode
