04-10-2014, 08:08 AM | #1 |
Not Yet Wild
Join Date: Mar 2014
Location: Cincinnati, OH
Posts: 14
|
Replacing Tie Rod ends - 4" lift
Curious if I can go back & use stock tie rods or do i need to try to find longer ones? Cart is a '92 Yamaha G9 and has a 4" economy/home made lift it seems.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-10-2014, 09:05 PM | #2 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: Replacing Tie Rod ends - 4" lift
Unless something was modified,then the stock tie-rods should work fine.Normally the only thing that is changed is the adjustment after the lift is installed.Hope this helps.
|
04-10-2014, 09:07 PM | #3 |
Not Yet Wild
Join Date: Mar 2014
Location: Cincinnati, OH
Posts: 14
|
Re: Replacing Tie Rod ends - 4" lift
Thanks for the response, definitely helps.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Replacing G29 "the Drive" brake pedal | Electric Yamaha | |||
What kind of offset is my EZGO RXV w/Jakes 6" Lift Kit and 2" spacer rear and 1" back | Lifted Golf Carts | |||
Replacing shackles for 2" more. | Lifted Golf Carts | |||
Replacing tire rod ends and rack bellows | Electric Club Car | |||
Do the tie rod ends need replacing? | Gas Yamaha |