|
06-28-2017, 11:00 PM
| #1 |
| Gone Wild   Join Date: Apr 2015 Location: NorCal
Posts: 700
|  Getting ready to power up the Lithium/Alltrax conversion I’m getting ready to power up the controller and test the installation. I've moved and removed a lot of wires and such. My confidence is high that I've done it right. After all, I bought all my parts from site sponsors and have spent every night reading post after post and it wasn't the Girls on Carts thread, either. Well, maybe a page or two before bed. Sweet dreams and all, right? Anyway, I'm just waiting for confirmation from scottyb to make sure my solenoid doesn’t need either the resistor nor the diode. The Alltrax has a March 2017 build date and from what I’ve read some places online, I don’t. However, the instructions for the Alltrax indicate both are needed. After spending over $2500 so far on this project, the last thing I need is to turn this into a Lithium fueled smoking pile of metal and plastic in my garage. Wish me luck. |
|  |
 Today
| |
 Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum | |
|
06-28-2017, 11:17 PM
| #2 |
| Gone Wild   Join Date: Nov 2016 Location: near Calgary, AB, Canada
Posts: 649
| Re: Getting ready to power up the Lithium/Alltrax conversion Good luck.  Looking forward to hearing about a successful test ... not like the North Korean missile tests! |
|
| |
|
06-29-2017, 02:56 AM
| #3 |
| Gone Wild  Join Date: Jan 2017 Location: Melbourne Australia
Posts: 812
| Re: Getting ready to power up the Lithium/Alltrax conversion Sounds like a great conversion. All the best.  |
| |
|
06-29-2017, 08:02 AM
| #4 |
| go to cartsunlimited.net   Join Date: Dec 2007 Location: Southern California
Posts: 67,810
| Re: Getting ready to power up the Lithium/Alltrax conversion The XCT does not require the solenoid have an external pre-charge resistor or surge arresting diode. Keep us posted on your results |
|
| |
|
06-29-2017, 12:03 PM
| #5 |
| Gone Wild Join Date: Apr 2015 Location: NorCal
Posts: 700
| Re: Getting ready to power up the Lithium/Alltrax conversion Thanks! I will make one more pass checking on all the wire connections and light her up tomorrow or Saturday. |
|
| |
|
06-29-2017, 12:10 PM
| #6 |
| Gone Wild Join Date: Nov 2014 Location: New Albany, Indiana
Posts: 391
| Re: Getting ready to power up the Lithium/Alltrax conversion OK, I'll bite. Where's the Girls on Carts thread? |
|
| |
|
06-29-2017, 12:58 PM
| #7 | |
| Gone Wild Join Date: Apr 2015 Location: NorCal
Posts: 700
| Re: Getting ready to power up the Lithium/Alltrax conversion Quote:
You have been warned! | |
|
| |
|
06-29-2017, 01:35 PM
| #8 | |
| Not Yet Wild Join Date: Nov 2016
Posts: 20
| Re: Getting ready to power up the Lithium/Alltrax conversion Must be a beauty. I get a "you do not have sufficient privileges to view this page" Quote:
| |
|
| |
|
06-29-2017, 01:52 PM
| #9 | ||
| Cave Dweller  Join Date: Apr 2013 Location: Always On The Move
Posts: 9,320
| Re: Getting ready to power up the Lithium/Alltrax conversion Quote:
Quote:
| ||
|
| |
|
06-29-2017, 01:55 PM
| #10 |
| Gone Wild  Join Date: Feb 2017 Location: Richmond, TX
Posts: 959
| Re: Getting ready to power up the Lithium/Alltrax conversion Ok, I can see the bar down the road a little.  |
|
| |
 |
| ||||||
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Forum | |||
| Lithium Nissan Leaf conversion x 2 | Lithium Club Car | |||
| EZGO 2Five Lithium Conversion | Lithium EZGO | |||
| Another lithium conversion questions post | Lithium Club Car | |||
| Lithium Battery Conversion | Lithium Club Car | |||
| Lithium Conversion (leaf battery) | Lithium EZGO | |||
Linear Mode
