06-21-2015, 07:16 AM | #1 |
Not Yet Wild
Join Date: Jun 2015
Posts: 6
|
80ish 512 not moving
Ok first let me say I am glad to be here now for my problem I have a 84 melex 512e I have tested the motor it is good even had the brushed replaced for good measure as best I can tell it is the F/R Switch the solenoid is working the pot on the pedal is working I noticed on the micro switchs on the f/r switch one has the rollar on it and one is missing the lever and rollar would I be correct to assume that this could cause my problem?
Thanks, Yonu |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-21-2015, 07:20 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 80ish 512 not moving
There are 2 ms on the F&R. one activates in both directions. One ms activates in Reverse only. The switch that activates in both F&R is critical to solenoid activation and cart operation.
|
06-21-2015, 07:30 AM | #3 |
Not Yet Wild
Join Date: Jun 2015
Posts: 6
|
Re: 80ish 512 not moving
Thanks that answers that question I will change that switch and see if that gets her running again.
Thanks, Yonu |
06-21-2015, 07:32 AM | #4 |
Not Yet Wild
Join Date: Jun 2015
Posts: 6
|
Re: 80ish 512 not moving
quick amendment I forgot to add the solenoid does click on when the pedal is pushed and passes full voltage so should I assume the switch that is broke is the reverse only switch?
Thanks, Yonu |
07-04-2015, 04:38 PM | #5 |
Not Yet Wild
Join Date: Jun 2015
Posts: 6
|
Re: 80ish 512 not moving
I changed the switch however no joy any suggestions on what I should check next I am kind of stuck I did ohm out the f/r switch and it seems to be working
Thanks, yonu |
07-04-2015, 05:00 PM | #6 |
Not Yet Wild
Join Date: Jun 2015
Posts: 6
|
Re: 80ish 512 not moving
Oh and I lied I have a 252 as best I can tell
|
08-06-2015, 09:56 AM | #7 |
Not Yet Wild
Join Date: Jun 2015
Posts: 6
|
Re: 80ish 512 not moving
Ok here is an odd one for you guys and hopefully someone can help I got it running sort of I replaced the micro switches the selenoid and the f/r switch and I can run the cart if I use a jumper wire across the selenoid. If I get the f/r switch in just the rig get place forward works without the jumper. Does anone have a diagram for the micro switched on a 252 with resister speed control so I can check and see what I have done wrong.
Thanks, Yonu |
|
|
Similar Threads | ||||
Thread | Forum | |||
Moving | Electric Club Car | |||
98 not moving | Electric EZGO | |||
not moving | Electric EZGO | |||
Need Help with 00 TXT Not Moving | Electric EZGO | |||
80 cc 36v not moving | Electric Club Car |