lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Post New Thread  Reply
Thread Tools Display Modes
Unread 11-15-2007, 05:33 PM   #1
Not Yet Wild
 
Join Date: Nov 2007
Posts: 25
Default need help with Melex resistor

I bought an old Melex off ebay, model 252. Have no idea what year it is, but I'm thinking it needs a new resistor set because I changed out the solenoid and ignition key switch, and the batteries seem good. They are not fully charged up but when I try to run the cart (it's jacked up with the 2 rear wheels off the ground) with the cart plugged in to the charger, the motor shaft spins slowly with the pedal to the metal and the rear wheels barely move. The motor is brand new and I know it's not that. Question is, what year is a 252? And I came across a resistor pack on ebay that says for EZ-go 1984 and older models, and looks like it could work since I know Melex is an ezgo knock off brand. Would that work? And if so, is the resistor pack just a 2 wire connection when I get it because it looks like 2 short battery cables go to it, but mine is so old and corroded I don't know how it is supposed to be wired properly. Thanks for any help
mobilefleet is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 11-16-2007, 08:23 AM   #2
Just me. .
 
phasetim's Avatar
Club Car
 
Join Date: Sep 2007
Location: Pensacola, FL
Posts: 1,092
Default Re: need help with Melex resistor

check f/r switch, then check the wiper board assembly..

The resistor should have about 5 wires going from it to the wiper board, the pedal is connected to the wiper board connecting to each copper contact controlling speed...

other problems... a battery totally failing and causing the car to die...
motor brushes worn, amature worn... Any motor wire burnt and almost broken...
phasetim is offline   Reply With Quote
Unread 11-20-2007, 06:53 PM   #3
WILD
 
caddymankc's Avatar
E-Z-GO
 
Join Date: May 2007
Location: lebanon county,pa
Posts: 1,266
Default Re: need help with Melex resistor

At full speed the resistors are out of circuit, sounds like it isnt wired up right, or contacts are shot,or cables.
caddymankc is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes


Similar Threads
Thread Forum
resistor cart Electric Club Car
Melex 3 wheeler conversion. Gas Melex
I want to put air ride on a melex On Road Golf Carts!
Red Hot Resistor Coil Electric EZGO
Need Help with Melex Melex


All times are GMT -5. The time now is 05:46 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.