95 EZGO TXT stacked lifts (12”total) and 26x9x14 build

Jcooleyezgo95 · 01-24-2018, 12:17 AM

Hi everyone just wanted to share my build I’m working on. 1995 ezgo txt 36v. I tore it apart and added 6” axle lift kit which almost cleared the 26” tires but the brake pedal lever was keeping from turning to the left so i ordered a 6” spindle lift. I did some research and order specific style lifts that had different style rear blocks so that i could stack together and so far it worked out great. Only issue was the steering spacer brackets not fitting the new spindles because the steering arms are thicker but a little bit of grinding and i was able to get it to fit. I’m starting to put it back together just waiting on body to get back from paint but let me know what y’all think so far.

Jcooleyezgo95 · 01-24-2018, 12:28 AM

The steering arms on the new spindles were thicker so i had to grind them down to get the extension brackets to fit.

Jcooleyezgo95 · 01-24-2018, 12:31 AM

Front end assembly

Jcooleyezgo95 · 01-24-2018, 12:40 AM

I used the bolts that came with the kit to bolt rear axle through bottom lift block and to the bottom of the top lift block. Then used factory u bolts to bolt to leaf springs. I plan on later building my own lift blocks that will have tabs so that i can but traction bars to eliminate any axle wrap. 24”s to bottom of frame this thing is massive i can’t wait to finish.

Jcooleyezgo95 · 01-24-2018, 12:43 AM

Working on reupholstering the seats. I order these new seat skins from eBay you just have to remove old ones and staple new ones on.

spriddle · 01-24-2018, 08:22 PM

Looks like you dove right in. Wow, you've already done quite a bit of work!
Looking really good so far. Keep the pic's coming.

dougs_huntingcart · 01-24-2018, 08:25 PM

Looking really cool.... do you have a plan for wires/controller/motor?

Jcooleyezgo95 · 01-25-2018, 02:00 PM

Thanks! I bought it this month and have been working on it for a week now. I am upgrading to 2 guage wires For now and if anything goes out i will be converting to Lifan 250 v-twin.

Buya57VW · 01-25-2018, 06:29 PM

I’m doing the same basic front end with the drop axle and drop spindle set up. The only piece I have left to figure out is the adapter from the steering to the tie rod. I’m thinking I may have to fab one. Did you buy yours or fab it?

Jcooleyezgo95 · 01-25-2018, 08:05 PM

It came with the kit but my new spindles were to thick so i grinded them down a bit.

01-24-2018, 08:22 PM	#6
spriddle Admin Join Date: Dec 2006 Location: TN Posts: 101,868	Re: 95 EZGO TXT stacked lifts (12”total) and 26x9x14 build Looks like you dove right in. Wow, you've already done quite a bit of work! Looking really good so far. Keep the pic's coming.

01-24-2018, 08:25 PM	#7
dougs_huntingcart Gone Wild Join Date: Oct 2012 Location: Canyon Lake, TX Posts: 628	Re: 95 EZGO TXT stacked lifts (12”total) and 26x9x14 build Looking really cool.... do you have a plan for wires/controller/motor?

01-25-2018, 02:00 PM	#8
Jcooleyezgo95 Not Yet Wild Join Date: Jan 2018 Location: League City, TX. Posts: 29	Re: 95 EZGO TXT stacked lifts (12”total) and 26x9x14 build Thanks! I bought it this month and have been working on it for a week now. I am upgrading to 2 guage wires For now and if anything goes out i will be converting to Lifan 250 v-twin.

01-25-2018, 06:29 PM	#9
Buya57VW Not Yet Wild Join Date: Feb 2017 Posts: 13	Re: 95 EZGO TXT stacked lifts (12”total) and 26x9x14 build I’m doing the same basic front end with the drop axle and drop spindle set up. The only piece I have left to figure out is the adapter from the steering to the tie rod. I’m thinking I may have to fab one. Did you buy yours or fab it?
Buya57VW Not Yet Wild Join Date: Feb 2017 Posts: 13

01-25-2018, 08:05 PM	#10
Jcooleyezgo95 Not Yet Wild Join Date: Jan 2018 Location: League City, TX. Posts: 29	Re: 95 EZGO TXT stacked lifts (12”total) and 26x9x14 build It came with the kit but my new spindles were to thick so i grinded them down a bit.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
My First TOTAL Build	Lifted Golf Carts
Using EzGo Total Charge	Electric EZGO
Double Stacked Lifts	Lifted Golf Carts
2012 EZGo Express S4 accessories; lifts, etc..?	Gas EZGO
Spindle Lifts And A-arm Lifts	Lifted Golf Carts