Nordco Marketeer to Willies

soundq1z24 · 12-07-2010, 09:59 PM

Still need to get two more rims like on the front. Plus we are switching the front to a four link setup. The front needs to move forward another inch. Build the roll cage. Then build the rear seat. After all that, it is off to the sand blaster and paint. Good thing a buddy is doing that for us.

Tell me what you think!

TheNewGuy · 12-08-2010, 10:39 AM

I like it so far!! Keep the pics coming.

soundq1z24 · 12-08-2010, 02:47 PM

Found the other two skinny rims and tires today. I also ordered longer coil overs for the rear. The bar tires are two inches taller than the fronts. Plus the new coil overs have 6 inches of travel compared to the 3 we have now.

smallblock450sl · 12-08-2010, 07:13 PM

Too Cool

Nice job so far. The body looks great. Keep up the great work.

soundq1z24 · 12-08-2010, 08:59 PM

Found the last two rims and tires at the junk yard tonight. 70.00 in all four. Two tires still have the nipples on them.

soundq1z24 · 12-12-2010, 03:26 PM

Had to remove those coil overs, way too soft. We added two air shocks and used one factory spring in the middle. No the cart can handle any load on the rear. I am going to add a tank and compressor to adjust on the fly.

littlebob · 12-12-2010, 05:18 PM

I like it so far. I joined the site to find projects like yours. I'm helping a friend in the cart
repair business and hopefully I can get a deal on a project cart and do something similar.

I saw "The New Guy" Yamaha Jeep and the possible Deuce cart someone was attempting.

Thanks for the ideas.

Strawhead · 12-13-2010, 04:31 AM

VERY Kool sound!!!!!!!
Keep us updated!

soundq1z24 · 01-06-2011, 07:24 PM

The coil overs are gone, too soft. We now have air shocks and single coil in the middle.

soundq1z24 · 03-18-2011, 09:32 PM

I hope to get the switched installed in the dash and the rest of the wiring done this weekend.

12-07-2010, 09:59 PM	#1
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19	Nordco Marketeer to Willies Still need to get two more rims like on the front. Plus we are switching the front to a four link setup. The front needs to move forward another inch. Build the roll cage. Then build the rear seat. After all that, it is off to the sand blaster and paint. Good thing a buddy is doing that for us. Tell me what you think!
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19

12-08-2010, 10:39 AM	#2
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,052	Re: Nordco Marketeer to Willies I like it so far!! Keep the pics coming.
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

12-08-2010, 02:47 PM	#3
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19	Re: Nordco Marketeer to Willies Found the other two skinny rims and tires today. I also ordered longer coil overs for the rear. The bar tires are two inches taller than the fronts. Plus the new coil overs have 6 inches of travel compared to the 3 we have now.
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19

12-08-2010, 07:13 PM	#4
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,875	Re: Nordco Marketeer to Willies Too Cool Nice job so far. The body looks great. Keep up the great work.

12-08-2010, 08:59 PM	#5
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19	Re: Nordco Marketeer to Willies Found the last two rims and tires at the junk yard tonight. 70.00 in all four. Two tires still have the nipples on them.
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

12-12-2010, 03:26 PM	#6
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19	Re: Nordco Marketeer to Willies Had to remove those coil overs, way too soft. We added two air shocks and used one factory spring in the middle. No the cart can handle any load on the rear. I am going to add a tank and compressor to adjust on the fly.
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19

12-12-2010, 05:18 PM	#7
littlebob Getting Wild Join Date: Dec 2010 Location: Baton Rouge, La Posts: 89	Re: Nordco Marketeer to Willies I like it so far. I joined the site to find projects like yours. I'm helping a friend in the cart repair business and hopefully I can get a deal on a project cart and do something similar. I saw "The New Guy" Yamaha Jeep and the possible Deuce cart someone was attempting. Thanks for the ideas.

12-13-2010, 04:31 AM	#8
Strawhead Future World Dictator Join Date: Apr 2010 Location: Bensenville,IL (Chicago) Posts: 1,752	Re: Nordco Marketeer to Willies VERY Kool sound!!!!!!! Keep us updated!

01-06-2011, 07:24 PM	#9
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19	Re: Nordco Marketeer to Willies The coil overs are gone, too soft. We now have air shocks and single coil in the middle.
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19

03-18-2011, 09:32 PM	#10
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19	Re: Nordco Marketeer to Willies I hope to get the switched installed in the dash and the rest of the wiring done this weekend.
soundq1z24 Not Yet Wild Join Date: Nov 2010 Posts: 19

Similar Threads
Thread	Forum
Converting Westinghouse Marketeer to Gas	Gas golf carts
Westinghouse / Nordco speed issue	Electric golf carts
Marketeer manual for electric motor and diff	Electric golf carts