05-26-2008, 07:01 PM | #1 |
Not Yet Wild
Join Date: Jan 2008
Location: new vienna ohio
Posts: 33
|
Jeffro157 g1
here are some pics of my 1984 g1 gas
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-26-2008, 10:58 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Jeffro157 g1
Looks good, Jeffro157.
How much lift did you build there? |
05-27-2008, 12:32 AM | #3 |
Not Yet Wild
Join Date: Jan 2008
Location: new vienna ohio
Posts: 33
|
Re: Jeffro157 g1
4 inch lift
|
05-27-2008, 05:14 PM | #4 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: Jeffro157 g1
Looks good, any other plans?
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
05-27-2008, 05:16 PM | #5 |
Not Yet Wild
Join Date: Jan 2008
Location: new vienna ohio
Posts: 33
|
Re: Jeffro157 g1
I am not sure yet only have 435 bucks involved so far so I figure I can invest more on down the line.. still trying to figure out what to do to the buggy..so if you have any ideas list them and I will keep them in mind
|
05-27-2008, 06:36 PM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Jeffro157 g1
Ideas are plentiful in the 'members rides' section.
|
05-04-2010, 07:02 PM | #7 |
Not Yet Wild
Join Date: May 2010
Posts: 2
|
Re: Jeffro157 g1
on the rear end, what were the 2 sizes of square tubing above the springs?
|
05-04-2010, 08:21 PM | #8 |
Gone Wild
Join Date: Mar 2010
Location: Eminence, IN
Posts: 534
|
Re: Jeffro157 g1
|
05-04-2010, 09:46 PM | #9 |
Not Yet Wild
Join Date: May 2010
Posts: 2
|
Re: Jeffro157 g1
i mean what were the sizes of the square tubing that were put together and welded
i also need the size of the rectangular tubing used in the front |
10-14-2010, 09:13 AM | #10 |
Not Yet Wild
Join Date: Oct 2010
Location: hecker il
Posts: 10
|
Re: Jeffro157 g1
Hello i was wondering if you could give me the exact measurements you used when you made your lift kit, i have a g1 also and stock is no fun
thanks |