06-07-2008, 02:20 PM | #1 |
Not Yet Wild
Join Date: Jun 2008
Posts: 20
|
Three wheeler EZGO
Some forums are helpful, some are not. Some run on about this and that and never privide helpful ideas and/or suggestions. Some not. I'm looking for ideas and thoughts from experienced folks.
I cut my EZGO into two halfs at the battery box. I'm going to beef the front portion, add a stem/post and center/cycle type steering and make this a man size stand up and ride unit. Front wheel will be 10x7, center, tyre 205/50-10. I'm undecided as to use the area between the rear wheels as standing/riding position or, reposition three batteries and stand infront of the second row of batteries and reposition the first set of three to just behind the motor. Initial questions/concerns are: 1. Weight of cart on front bearings seems better distributed with a wheel with NO "offset". I have no data/experience to suport this --- seems to make sense. a) what do people do/use with three wheeled carts. Is wheel center or offset? b) if I select a live axel would it be ok to use an offset wheel. Is this wheel/standard golf cart wheel strong enough for application? 2. I've spent time with local cops, DMV and CHP. The plan is to register and get licensed as "cycle". Among other items, cart will need front brakes. Front hub(s) will have hub and disc brakes from mini-chopper parts supplier. Has anyone ever added brakes to the front of a cart? Once again --- seems straight forward. Down tubes will be fabricated once wheel,hubs, brakes assembled. 3. What affect will moving a set of three batteries 24" away from the other batteries have on the operation of the motor, electronics and charging? Thanks, Gents and Ladies mj |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-07-2008, 02:42 PM | #2 |
Not Yet Wild
Join Date: Jun 2008
Posts: 20
|
Re: Three wheeler EZGO
Something like this, except 90 degree tiller steeling.
|
06-07-2008, 04:02 PM | #3 | |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Three wheeler EZGO
Quote:
|
|
06-07-2008, 06:14 PM | #4 |
Not Yet Wild
Join Date: Jun 2008
Posts: 20
|
Re: Three wheeler EZGO
Thanks for reply.
Yes, I intend to lower batteries. Using welding cable is intended. I'm trying to imagine standing still and pivoting --- bearings may give easier turn, but still lot of rubber on surface. I'll live with. Other wise, why would live axel vs bearings make for harder/more difficult turning? So far foot print is triangle about 39/39/39, ( don't remember ), or width of rear wheels. Don't want sit-down, want stand-up. So far largest fab consideration seems to be doing a down tube/post with bearings top and bottom. Thanks for comments Belmont winner 38/1 !!!! Don't count the chickens....!!! |
06-07-2008, 09:34 PM | #5 |
Born Wild
Join Date: Mar 2007
Location: Clover SC.
Posts: 5,552
|
Re: Three wheeler EZGO
Live axle will turn both rear wheels the same amount, this will push the rig in the direction the rear wheels are going while trying to turn. the inside tire/wheel will need to travel less distance in the direction of the turn and the only way it can is to break contact with the ground. on open rear ends the setup will allow either wheel to travel shorter or longer distances without breaking contact with the ground.
|
06-08-2008, 12:55 PM | #6 |
Not Yet Wild
Join Date: Jun 2008
Posts: 20
|
Re: Three wheeler EZGO
Morning,
OK Let's try this o n e m o r e time. If you look at the pic you'll get a better idea of what I'm building. The front half of golf cart will set aside for future parts/projects. I will beef up the portion just in front of the batteries to support a stem/steering post. The drive/transmission end will remain unchanged. It's perfect the way it is. This "live" axel conversation was intended to be about steering wheel/tire, NOT the drive ones. Hope that clears it up. And yes....I understand functions of slip, limited, proportional differentials vs. solid drive wheel configurations. Have a good one. mj |
|
|
Similar Threads | ||||
Thread | Forum | |||
Melex 3 wheeler conversion. | Gas Melex | |||
ez go 3 wheeler and trailer | Golf Carts and Parts | |||
lifting a 3 wheeler | Electric EZGO | |||
pics of the ugliest 3 wheeler in south fla | Members Rides | |||
3 wheeler front end | Gas EZGO |