testing ignition coil
hey there ,i just put new rings, reed valves and crank seals .in my g-1 ,put it all back together and no spark. i checked all fuses and my ignition coil is kinda rigged. so i ordered a new one .but i would still like to know how you are supposed to check one i assume with multi meter. i hope this is the problem but i needed one anyway .thanks for any input.
|
Re: testing ignition coil
A simple test .... remove the plug end from the coil wire and hold it with insulated pliers 1/4 inch from the engine while cranking. If no spark check engine ground with a test light...... I will post some test procedures here in a minute 8)
|
Re: testing ignition coil
yes i have done all that .so i know it is not sparking .but i don,t know if it something before the coil ,or the coil itself .i want to be able to test just the coil. i did order a new one .but i still would like to know how to test it ,if you got some more info send it on. thanks for your help
|
Re: testing ignition coil
I was having trouble getting this to upload this AM......look here
http://www.buggiesgonewild.com/gas-c...ont-spark.html |
Re: testing ignition coil
thanks a bunch scottyb it is real hard to read the trouble shooting guide and the best i could tell it was for a four stroke but some of the other info is helpfull i hope .thanks again i will keep you informed ..
|
Re: testing ignition coil
hey scotty i just reread your original post and saw were you said to check engine ground with a test light i`m going to give you something to laugh at and ask how do you do that???
|
Re: testing ignition coil
Quote:
|
All times are GMT -5. The time now is 07:06 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.