|
is this a controller problem
problem started when using reverse you had to get the accelerator in just the right spot to move if you didn't hit the sweet spot no go forward was normal i used it this way for months now the same started when using forward and yesterday it won't move at all solenoid clicks but no go
|
Re: is this a controller problem
Sounds like a controller problem.... lemme guess, no, tell us what year CC it is?
|
Re: is this a controller problem
it is a 2000
|
Re: is this a controller problem
Aleast it is not an IQ car :thumbup:
|
Re: is this a controller problem
Bink, I just had the same problem on a 97' with a controller. Problem
was, some of the small wires that went to the controller had what looked like burned, maybe rusted connectors that were not making good contact. Replaced the connectors on the wires and it's back in business. Good luck. |
Re: is this a controller problem
Also, check the micro switches on the forward/reverse shifter.
|
Re: is this a controller problem
thanks big bump when i get back to where my cart is i'l check those items when you say you had the same problem do you mean exactly did yours quit completly?
|
Re: is this a controller problem
Started one day when it would not reverse out of the cart stall. By the
time I drove it to the pro shop, it would reverse. Then one day it just completely quit both directions. Funny thing, the solenoid still clicked, but still wouldn't run when solenoid was jumped. I hope your fix is something simple like this was. |
| All times are GMT -5. The time now is 09:07 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.