|
RXV brake release
3 Attachment(s)
2009 RXV brake not releasing
1)installed a new brake motor 2)bought new batteries Brake motor still not releasing Is my selinoid correctly hooked up. The red wire (with yellow wire with it) is going to positive battery. The other red wire (with the white wire with it) is going to controller B+ What to try next |
Re: RXV brake release
Anybody out there with RXV experiences. I've been working on this thing for weeks.
|
Re: RXV brake release
Cannot figure out why this brake will not release
|
Re: RXV brake release
Download Rxv Danaher troubleshooting Guide, study up, do some tests.
|
Re: RXV brake release
Where is that located
|
Re: RXV brake release
1 Attachment(s)
Nvm, here ya go.
|
Re: RXV brake release
Okay I tried to unplug the plug going into the controller. But couldn't get it out. But what you know me wiggle it. The parking brake releases next time I pushed on the gas.
|
Re: RXV brake release
Not sure what I did. But I hope it stays working
|
Re: RXV brake release
I hate "ghost fixes", they will haunt you again! BTW, I have seen connector problems occasionally at the controller (but that was typically on the newer Curtis rxv).
|
Re: RXV brake release
Yeh me too.
|
| All times are GMT -5. The time now is 08:06 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.