Rear canopy posts on aftermarket rear seat. 2006 Precedent
So my recently purchased 2006 Precedent came with a relatively new aftermarket rear seat/fold open pickup bed. As I slowly disassemble everything to give it a once over and clean off the years of neglect I noticed the rear canopy post/drain-pipes were replaced with a hollow square channel just like the front (likely part of the aftermarket kit?) - but they just kinda sits in the rear holes without anything but gravity holding them down. I guess the original posts were plastic and form-fit snugly in these holes? My worry is that over time the vibration will make these posts chew a hole threw the plastic. Maybe the previous owner neglected to put a piece in those holes to better receive the square channel? Other than that it does appear to be a pretty robust install.
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
1 Attachment(s)
...and there it is. Parts 26 and 27 are what hold the rear posts on an original config. Guess I'll have to jury rig something to keep them from chewing things up. :?
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
Not sure what seat kit you have but typically you buy rear posts based on that kit. If there is anything indicating who made it that may be worth looking into.
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
Quote:
Im going to peruse some pictures online to see if I can figure out whats missing. If that fails I'll drop in at out local cart guy to see what he thinks. - Gazoo |
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
One other thing I remembered. If it is one of the standard Precedent Monsoon tops, most of the aftermarket posts I have seen have a plastic adapter to fit to the roof. This is for both adapting to the larger opening and for the rainwater to collect and run down inside the struts. That being said the ones I have seen like this the struts go through the openings on top of the body to drain to the ground. Here's a set on Amazon as an example. https://www.amazon.com/Club-Preceden.../dp/B0746SCH8J
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
The rear seat on my cart utilized the OEM plastic roof struts. A bracket to support the front and rear seatbacks bolted into the holes where items 26 & 27 were removed. That bracket also had a plate for mounting the OEM struts.
I once replaced the OEM struts with plain square tubing similar to what you described. Had to drill holes in the lower end of the tubing to bolt up to the bracket. I eventually removed the tubing and went back to the OEM struts. |
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
You're probably supposed to be using the OEM rear plastic braces. I've got a whole pile of those things if you need some. Post some pictures of what you've got and I'll let you know what you need to do. There's no reason a metal brace should be running down into that hole.
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
Quote:
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
1 Attachment(s)
Quote:
|
Re: Rear canopy posts on aftermarket rear seat. 2006 Precedent
Quote:
|
All times are GMT -5. The time now is 06:21 AM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.