How are you guys attaching the RGB LED Strips?

doublestack00 · 09-23-2016, 03:22 PM

Bought a set to put on the bottom of my cart, the double sided tape that comes on it is a joke so I thought about buying some 3M tape to use.

What are you guys using to hold it to the bottom? Got pics?

LVCJ · 09-23-2016, 05:49 PM

Yep....The 3M tape is the ticket!

Just make sure the surface is clean and dry.

thetoddjohnson · 09-26-2016, 06:41 AM

Quote:

Originally Posted by doublestack00

Bought a set to put on the bottom of my cart, the double sided tape that comes on it is a joke so I thought about buying some 3M tape to use.

What are you guys using to hold it to the bottom? Got pics?

Zip ties. My lights were a 15' long roll. They had adhesive on one side (the strip is flat), but since the cart isn't 15' long the strip had to make many turns and hence it isn't possible to have the adhesive side always be facing up. It was easiest to just zip tie the whole thing.

TJ

09-23-2016, 03:22 PM	#1
doublestack00 Getting Wild Join Date: Jan 2016 Location: GA Posts: 91	How are you guys attaching the RGB LED Strips? Bought a set to put on the bottom of my cart, the double sided tape that comes on it is a joke so I thought about buying some 3M tape to use. What are you guys using to hold it to the bottom? Got pics?

09-23-2016, 05:49 PM	#2
LVCJ going,.. going,.. gone! Join Date: Apr 2014 Location: Third Rock from the Sun...Vegas baby! Posts: 1,422	Re: How are you guys attaching the RGB LED Strips? Yep....The 3M tape is the ticket! Just make sure the surface is clean and dry.

Similar Threads
Thread	Forum
2010 G29 - Attaching Voltage Reducer to frame	Electric Yamaha
rubber strips under seat	Gas Club Car
Attaching accelerator spring to bracket	Gas Club Car
clubcar strips	Design Center

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum