Power Plants

NO NO NO E-Z-GO! · 12-22-2007, 09:58 PM

They won't pull it as bad, but you'll still know they're in there.

roady89 · 12-23-2007, 10:08 AM

Since you will be running stock sized tires it may not be bad at all. If you were running 22's then it would be a real drag.

With 8:1's and the 13 HP you should have real good mid range power. Mid-upper 20's. I agree with the other guys...try modding the exsisting motor first before buying the drop in replacement.

TARTCART · 12-23-2007, 02:50 PM

I'm going to run 20" tires on back 8" wheels, on the CPP site it says 6:1 gears will make stock cart go 30+ mph, thats what I'm looking for, so later I can modify clutches, maybe jet up carb, K+N filter.
If that dont work I'll juice it

caddymankc · 12-24-2007, 09:09 PM

Welches or snapple?lol

TARTCART · 12-25-2007, 03:28 PM

moonshine

Goat53 · 05-18-2008, 09:27 AM

I am putting a 18 briggs opposed twin flathead in my cart, and had to lift only 1/2 inch so I decided to move the rear end back 1 inch to better center the 20" tires in the wheel wells , so you can go big block without lifting , it's tight tho . got it bolted down yesterday .

12-22-2007, 09:58 PM	#11
NO NO NO E-Z-GO! Gone Wild Join Date: Dec 2006 Location: ComplainAboutNoNo'sProfile-Ville Posts: 5,081	Re: Power Plants They won't pull it as bad, but you'll still know they're in there.

12-23-2007, 10:08 AM	#12
roady89 GhEtTo PrAnKsTeR Join Date: Jun 2007 Location: Kaufman, Texas Posts: 3,095	Re: Power Plants Since you will be running stock sized tires it may not be bad at all. If you were running 22's then it would be a real drag. With 8:1's and the 13 HP you should have real good mid range power. Mid-upper 20's. I agree with the other guys...try modding the exsisting motor first before buying the drop in replacement.
	Golf Cars \| Lifted Golf Carts \| Electric Golf Carts Custom EZGO \| B&S V-Twin \| All Sports Long Travel Lift \| 8:1 Gears \| 22" Titan AT489's \| \| \| \| \| \| \|

12-23-2007, 02:50 PM	#13
TARTCART Not Yet Wild Join Date: Dec 2007 Location: North Carolina,Clayton Posts: 65	Re: Power Plants I'm going to run 20" tires on back 8" wheels, on the CPP site it says 6:1 gears will make stock cart go 30+ mph, thats what I'm looking for, so later I can modify clutches, maybe jet up carb, K+N filter. If that dont work I'll juice it

12-24-2007, 09:09 PM	#14
caddymankc WILD Join Date: May 2007 Location: in my bronco,pa Posts: 1,184	Re: Power Plants Welches or snapple?lol

12-25-2007, 03:28 PM	#15
TARTCART Not Yet Wild Join Date: Dec 2007 Location: North Carolina,Clayton Posts: 65	Re: Power Plants moonshine

05-18-2008, 09:27 AM	#16
Goat53 Gone Wild Join Date: Jan 2008 Location: Lowndes County Ga. Posts: 212	Re: Power Plants I am putting a 18 briggs opposed twin flathead in my cart, and had to lift only 1/2 inch so I decided to move the rear end back 1 inch to better center the 20" tires in the wheel wells , so you can go big block without lifting , it's tight tho . got it bolted down yesterday .

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
Lack of power	Gas Yamaha
Club Car power	Electric Club Car
V-power gas...	Gas Yamaha
no power to motor	Electric Yamaha
power spring	Lifted Golf Carts