lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > On Road Golf Carts!
On Road Golf Carts! Low to the ground Golf Carts!



Post New Thread  Reply
Thread Tools Display Modes
Unread 04-07-2011, 07:55 PM   #11
Gone Wild
 
1fastbuggy's Avatar
E-Z-GO
 
Join Date: Feb 2011
Location: Louisiana
Posts: 179
Default Re: My Build Thread (many ???'s inside)

I dropped mine two inches and i don't have any problems with my steering shaft. I can't run my cart all the way down because it rubs so i would try it before u cut it.
1fastbuggy is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Unread 04-08-2011, 12:47 PM   #12
Gone Wild
 
1sikcart's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Pittsburgh PA/ Vacationland Campground
Posts: 208
Default Re: My Build Thread (many ???'s inside)

Quote:
Originally Posted by 1fastbuggy View Post
I dropped mine two inches and i don't have any problems with my steering shaft. I can't run my cart all the way down because it rubs so i would try it before u cut it.
too late now the shaft is cut, i guess i'll find out how it works as soon as my shocks get here.
1sikcart is offline   Reply With Quote
Unread 04-08-2011, 12:50 PM   #13
Gone Wild
 
1sikcart's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Pittsburgh PA/ Vacationland Campground
Posts: 208
Default Re: My Build Thread (many ???'s inside)

Quote:
Originally Posted by cdodd3 View Post
How much of a good deal?
well i'm local so no shipping and they were for his wife's cart so he gave them to me at cost almost.

i can't say price but 200 less then i found them for on ebay

the owner mike is a stand-up guy and i'm sure he would take care of anyone nearly the same....
1sikcart is offline   Reply With Quote
Unread 04-11-2011, 02:03 PM   #14
Gone Wild
 
1sikcart's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Pittsburgh PA/ Vacationland Campground
Posts: 208
Default Re: My Build Thread (many ???'s inside)

alot of progress made yesterday:

-cart is now lowered and perfectly even
-entire frame is painted and ready for assembly
- just picked the body up from paint this morning (looks amazing!!)
-started painting the seat (cheap option)
-finished all painting of trim and odds and ends

i'm hoping to start putting the body on tonight, and try to put up some new pics also tonight...
1sikcart is offline   Reply With Quote
Unread 04-11-2011, 06:37 PM   #15
Let's go racin' boyz!!
 
TerryH's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,155
Default Re: My Build Thread (many ???'s inside)

Quote:
Originally Posted by 1sikcart View Post
alot of progress made yesterday:

-cart is now lowered and perfectly even
-entire frame is painted and ready for assembly
- just picked the body up from paint this morning (looks amazing!!)
-started painting the seat (cheap option)
-finished all painting of trim and odds and ends

i'm hoping to start putting the body on tonight, and try to put up some new pics also tonight...
You know better than to post something like this because.........

TerryH is offline   Reply With Quote
Unread 04-12-2011, 02:21 PM   #16
Gone Wild
 
1sikcart's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Pittsburgh PA/ Vacationland Campground
Posts: 208
Default Re: My Build Thread (many ???'s inside)

^^^^ i agree! the pics were just garbage taken at night from my dark garage. it's pouring in Pittsburgh so i'm hoping to get it outside tomorrow and get some decent pics.

one question i have is now that i have doubled the leafs for strength the cart doesn't seem as low in the front. what should i do? i bought a new set of HD springs and took the long one out and matched it with the stock long one. It took away the bounce of the cart but also raised it more than i hoped. Should i try running the new HD spring by itself? or just leave it alone since the cart is 90% done??
1sikcart is offline   Reply With Quote
Unread 04-13-2011, 06:04 AM   #17
Let's go racin' boyz!!
 
TerryH's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,155
Default Re: My Build Thread (many ???'s inside)

Quote:
Originally Posted by 1sikcart View Post
^^^^ i agree! the pics were just garbage taken at night from my dark garage. it's pouring in Pittsburgh so i'm hoping to get it outside tomorrow and get some decent pics.

one question i have is now that i have doubled the leafs for strength the cart doesn't seem as low in the front. what should i do? i bought a new set of HD springs and took the long one out and matched it with the stock long one. It took away the bounce of the cart but also raised it more than i hoped. Should i try running the new HD spring by itself? or just leave it alone since the cart is 90% done??
I am running just the single leaf on the front and rear.
TerryH is offline   Reply With Quote
Unread 04-13-2011, 12:07 PM   #18
Gone Wild
 
1sikcart's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Pittsburgh PA/ Vacationland Campground
Posts: 208
Default Re: My Build Thread

Quote:
Originally Posted by TerryH View Post
I am running just the single leaf on the front and rear.
it isn't too bouncy? i've decided to take the front end apart again and try running just the heavy duty leaf by itself and pray that it's not bouncy like running a single stock leaf.

i thought i did myself a favor by buying the HD leafs but it turns out they are most likely the reason that it's not as low as i would like. Hopefully switching will help
1sikcart is offline   Reply With Quote
Unread 04-13-2011, 04:28 PM   #19
Let's go racin' boyz!!
 
TerryH's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Springdale, AR
Posts: 4,155
Default Re: My Build Thread

Quote:
Originally Posted by 1sikcart View Post
it isn't too bouncy? i've decided to take the front end apart again and try running just the heavy duty leaf by itself and pray that it's not bouncy like running a single stock leaf.

i thought i did myself a favor by buying the HD leafs but it turns out they are most likely the reason that it's not as low as i would like. Hopefully switching will help
It's not bouncy at all. What shocks are you using?
TerryH is offline   Reply With Quote
Unread 04-13-2011, 10:00 PM   #20
Gone Wild
 
1sikcart's Avatar
E-Z-GO
 
Join Date: Oct 2010
Location: Pittsburgh PA/ Vacationland Campground
Posts: 208
Default Re: My Build Thread (many ???'s inside)

Finally have some pics! I hate to show it not completely finished but here they are, hopefully i can get some better ones this weekend











not bad for 14 days!!
1sikcart is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > On Road Golf Carts!


Thread Tools
Display Modes


Similar Threads
Thread Forum
My lowered E-Z-GO build thread On Road Golf Carts!
Got the Umaxx...build thread. Gas Yamaha
Trkbilder's Build Thread Members Rides
"NoBigThings" build thread Lifted Golf Carts
1996 CC build thread Electric Club Car


All times are GMT -5. The time now is 11:59 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.