Re: My cart wont move. Please help with troubleshooting
If the solenoid clicks when the pedal is pushed, the problem is in the high current circuit. The LED battery meter is most likely a separate issue.
Lift rear wheels off ground and put on jackstands so the half ton cart doesn't take off unexpectedly and run over somebody or something.
Connect your DVM between the B- and M- terminals on the controller.
Press pedal just far enough for solenoid to click.
You should read full battery pack voltage.
If not, use the Positive test lead that was attached to the M- terminal to trace the high current cables through the motor and F/R switch back to the main B+ terminal.
|