Lets see, I used this diagram:
http://www.buggiesgonewild.com/elect...-diagrams.html
(The second one shown, the big one) Roady89 told me to use it
I have a late 70s style 36V resistor cart...
It is wired exactly to the diagram's specifications... (checked by me and 3 others, many times)
I have 38V across the battery pack (brand new as of yesterday, 6.3V per battery, 90% charged)
I have 1 ohm across two of the motor contacts
I have 1400 ohms across the two other contacts (one of which is a direct ground to the battery)
My solenoid won't activate, I am only getting 0.1 volts through the activation circiut, but no resistance (when eveything is turned on)
The reverse buzzer works properly, and loudly...
I have checked all the circuits again and again, no broken contacts, or even dirty ones...
Batteries have proper water levels...
I see no sparks (not even at night) when speed board changes speeds...
The motor won't go at all...
The motor won't even go when I bridge (bypass) the solenoid...
It won't even go on jack stands!!!
HELP ME PLEASE!!! If you need pictures or even video I can do that!!!
Please, constructive criticism only, I put 3 months of work into this cart!!!