Buggies Gone Wild Golf Cart Forum - View Single Post - RXV Danaher to Curtis Conversion Instructions

bsikes09 · 09-06-2016, 05:35 PM

Okay, so I just checked my cart. The orange wire runs in front of the battery pack and in to the OLD harness plug. Cut it and butt splice the pigtail from the NEW harness to it. As for the white wire you want to follow the wire from the motor brake that runs up the side of the battery pack and instead of cutting and eliminating any wires here, there should have been a 3-wire tap in your kit. You are going to cut the motor wire and insert both ends in to this tap along with the pigtail from the harness crimp it and you should be good to go. Everything else should be plug and play. Let me know if you need clarification in any of these areas.

09-06-2016, 05:35 PM	#7
bsikes09 Getting Wild Join Date: Aug 2015 Location: Savannah, GA Posts: 127	Re: RXV Danaher to Curtis Conversion Instructions Okay, so I just checked my cart. The orange wire runs in front of the battery pack and in to the OLD harness plug. Cut it and butt splice the pigtail from the NEW harness to it. As for the white wire you want to follow the wire from the motor brake that runs up the side of the battery pack and instead of cutting and eliminating any wires here, there should have been a 3-wire tap in your kit. You are going to cut the motor wire and insert both ends in to this tap along with the pigtail from the harness crimp it and you should be good to go. Everything else should be plug and play. Let me know if you need clarification in any of these areas.