View Single Post
Old 07-29-2011, 08:50 AM   #3
JohnnieB
Techno-Nerd
 
JohnnieB's Avatar
E-Z-GO
 
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
Default Re: Electric solenoid vs control problems.

Quote:
Originally Posted by 10tontractor View Post
...............Start Battery voltage: 34.5 All batteries ck out fine and all cells have good specificity rates..........
At 34.5 volts, your battery pack is 90% or more discharged.
A fully charged 36V battery pack will read 38.2 volts
A fully charged 6V battery will read 6.37 Volts
A fully charged Lead Acid wet cell will have a Specific Gravity of 1.277

I'm pretty sure those tests are to be made with fully charged, or near fully charged batteries.
Charge the battery and try again.

FWIW. Some controllers have a low battery cut off and will not run if battery is too low.
JohnnieB is offline   Reply With Quote