[caokgafamily]

I hope everybody is doing well.

My current cart is an 03 series 48 volt with a mcor 5-0k that feeds my current controller.

If I have a mcor is it compatable with a FSIP series controller that the input is a 3 wire for a vglide?

I have looked at the FSIP info and can't really determine this? The PN for the FSIP is 51-60L 700 NNVSS2. 700amp 72 volt series controller. The low cut off is 25 volts so it should work with my 48 volt cart. But my concern is the "V" in the PN. is the 5 and V below interchangeable?

ARG 6 Accelerator Input
0 - 0 to 5K Ohms
5 - 5K to 0 Ohms
V – 3-wire 5k pot,
Club Car V-Glide
S – Special setting

Thanks!
Steve