Buggies Gone Wild Golf Cart Forum - View Single Post

LURCH · 02-01-2012, 09:05 PM

You hole saw the cone out going into the carb. then drill 5 - 1/2" holes in the very back of the box and cut a slot in the interior of the box. I will say these mods are for their filter and jets, he went through all of the drilling and cutting. If you do this I'll take a couple of pic's and post so you can see what I'm talking about.

02-01-2012, 09:05 PM	#4
LURCH Gone Wild Join Date: May 2011 Location: North East Tn. Posts: 1,029	Re: k&n air filter You hole saw the cone out going into the carb. then drill 5 - 1/2" holes in the very back of the box and cut a slot in the interior of the box. I will say these mods are for their filter and jets, he went through all of the drilling and cutting. If you do this I'll take a couple of pic's and post so you can see what I'm talking about.