|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
07-13-2014, 10:38 AM | #1 |
Not Yet Wild
Join Date: Jul 2014
Posts: 3
|
2008 Precedent Replaced Speed Sensor - Problem persists
Hello All,
I have read most online postings about my 2008 Club Car Precedent 48V speed problem and can't find a solution. Problem is cart will only go about half speed on a full charge. Here is what I have done: 1. Replaced the Speed sensor (ADC motor) 2. Tried the speed sensor test - pushed the cart forward and received no beeps from the reverse sensor. 3. Verified batteries are topped off with distilled water. Here are some questions: 1. The speed sensor I took out had a magnet that was a segmented circle. Basically it had two salient ends 180 degrees apart that arced about 30 degrees or so each. The one I replaced it with was a complete circle. Is this causing the unit to not count the RPMs and see no delta as the magnet rotates? 2. Is there another part of the speed sensing circuitry I should look at? I have seen some posts about spraying WD-40 of the "gas" pedal. Is there a potentiometer that I should inspect there? 3. Is it normal for the unit to drip a white corrosive substance? Thinking of switching to gas because of this. Thanks many. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Speed sensor for CC Precedent | Electric Club Car | |||
08 precedent electric speed sensor problem. Cart starts at proper speed then slows . | Electric Club Car | |||
Half speed, speed sensor problem?. | Electric Club Car | |||
Speed Sensor Problem | Electric EZGO | |||
08 precedent speed sensor | Electric Club Car |