|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-01-2009, 06:04 PM | #1 |
Not Yet Wild
Join Date: Jan 2009
Location: Mississippi
Posts: 23
|
remove pass.side rear axle
I have a 96 dcs i am trying to do a brake job on. Well the drum on the pass side wouldn't come off. I adjusted the brakes all the way down and still nothing. I put a puller and heat on it, mushroomed the tip of the axle,I can fix that no problem. After that i started cutting then nicked the splines and i'm sure i melted the grease out of the bearing. So after all that i need to take the axle out i got the outside snap ring off.That is as far as i got so far i didn;t know if there is another ring inside or not.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-01-2009, 06:43 PM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: remove pass.side rear axle
No other ring. They can be a ***** to get off sometimes. Try soaking the splines and let it cool a while. I had to build a puller but ended up bending the puller. The good news is your splines are not stripped.
|
03-01-2009, 08:28 PM | #3 |
Not Yet Wild
Join Date: Jan 2009
Location: Mississippi
Posts: 23
|
Re: remove pass.side rear axle
I built a puller out of 2 3/8" flat bar and bent them both. I finally got the drum off now i need to get the axle out so i can repack the bearings and clean the splines and threads. Who ever did the last brake job must have lost the rear push rods cause both left and right were in backwards and will not fit in the sleve the correct way so the rear brake was being pushed inward instead of toward the drum
|
03-01-2009, 09:03 PM | #4 |
DELETED
Join Date: Mar 2008
Posts: 1,025
|
Re: remove pass.side rear axle
Good deal .......... When you put the thing back together, don't spare the anti-seize.
|
03-08-2009, 09:31 AM | #5 |
Not Yet Wild
Join Date: Mar 2009
Location: jacksonville, fl.
Posts: 4
|
Re: remove pass.side rear axle
turn hud around - crank nut down - should pull it out- maybe a little mallet to the back side. this just worked for me lol
|
03-08-2009, 07:17 PM | #6 | |
Not Yet Wild
Join Date: Feb 2009
Posts: 15
|
Re: remove pass.side rear axle
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
How to remove bearings from rear end gears? | Gas Club Car | |||
rear axle removal | Electric golf carts | |||
G2 loud rear axle | Gas Yamaha | |||
Changing rear driver side axle. | Gas EZGO | |||
rear axle removal? | Gas EZGO |