|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
04-10-2012, 03:59 PM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
B&S model ID help
Hello,
New cart owner here... it's a Yamaha with a 16HP Vanguard V Twin, at least that's what it has on the air filter cover. There are no tags or numbers in the normal places. It has black tins and air filter. I need a flywheel/ring gear and I really need the numbers to order. Any help would be appreciated, thanks Don |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-11-2012, 01:14 PM
|
#2 |
|
Admin/Moderator
 Join Date: Dec 2006
Location: Ohio
Posts: 18,044
|
Re: B&S model ID help
Welcome to BGW!
Should have a number stamped on the engine block, just not sure where. |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
04-11-2012, 02:53 PM
|
#3 | |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Quote:
It's suppose to be on the fan shroud or the valve cover, but nothing there. I called B&S and their support sucks...I'm between a rock and hard spot without the numbers. Maybe I'll sell it buy a Honda, ha |
|
|
|
|
|
04-12-2012, 09:42 AM
|
#4 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,044
|
Re: B&S model ID help
If anyone can help it would be Tom at CPP, give him a call>>http://www.cartpartsplus.com/
|
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
04-12-2012, 10:30 AM
|
#5 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Thanks
|
|
|
|
|
04-12-2012, 10:42 PM
|
#6 |
|
Getting Wild
Join Date: Sep 2009
Location: Clover, SC
Posts: 128
|
Re: B&S model ID help
If you pull the engine and remove the flywheel I think you will be able to find a part #. I just had mine off to install a timing key and I remember seeing a number on there.
|
|
|
|
|
04-15-2012, 10:43 AM
|
#7 | |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Quote:
I'm going to pull the flywheel today and check it, thanks |
|
|
|
|
|
05-05-2012, 09:27 AM
|
#8 | |
|
Getting Wild
Join Date: Sep 2009
Location: Clover, SC
Posts: 128
|
Re: B&S model ID help
Quote:
|
|
|
|
|
|
05-05-2012, 04:17 PM
|
#9 | |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
Quote:
1295-E1 code 99020311 and it fit. The guy I bought it from also had the stater & regulator which I also bought, so I ended up spending $78.00 for all of it and it starts and runs great. Thanks for asking. |
|
|
|
|
|
05-05-2012, 04:23 PM
|
#10 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 8
|
Re: B&S model ID help
See if I can do this picture
 |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| What model is better? | Gas Club Car | |||
| EZ-GO Which model | Electric EZGO | |||
| precedent model vs ds model | Gas Club Car | |||
| Is a G8 model the same as a G9? | Gas Yamaha | |||
| model no | Electric EZGO | |||
Linear Mode
