|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
10-22-2007, 07:44 PM
|
#1 |
|
Gone Wild
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
|
Rocker panels and brush guard...Not a happy camper.
Just ordered a set of each, Not too happy.
This brush guard had to be bent to be able to fit on the front, It also did not come with instructions (None really needed but still) These panels came with a wadded piece of paper listing parts and two steps: Remove existing hardware Install support brackets. So if anyone has the same panels mind shooting me a pm?  |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-22-2007, 08:11 PM
|
#2 |
|
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Rocker panels and brush guard...Not a happy camper.
I can see your mistake...
You ordered from BU!! You actually expected it to WORK??  |
|
|
|
|
10-22-2007, 08:24 PM
|
#3 |
|
Gone Wild
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
|
Re: Rocker panels and brush guard...Not a happy camper.
Well i mean they look great, But there are no holes in the rocker panels! Pshhh no drilling or cutting required... But you do have to bend and grind it!
|
|
|
|
|
10-22-2007, 08:29 PM
|
#4 |
|
nimda
 Join Date: Jun 2007
Posts: 13,022
|
Re: Rocker panels and brush guard...Not a happy camper.
Gee...Considering you bought this from BU, I wonder what would happen if you posted this on BU's forum? I can understand your gripe though.
|
|
|
|
|
10-22-2007, 08:39 PM
|
#5 |
|
Gone Wild
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
|
Re: Rocker panels and brush guard...Not a happy camper.
I did post it over there
 |
|
|
|
|
10-22-2007, 08:43 PM
|
#6 |
|
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Rocker panels and brush guard...Not a happy camper.
I certainly hope you've learned your lesson.
  You probably could have gotten the same type of items, except better quality and cheaper, from Cart Parts Plus.  Nevertheless, where are the pictures!?! |
|
|
|
|
10-22-2007, 08:59 PM
|
#7 |
|
Gone Wild
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
|
Re: Rocker panels and brush guard...Not a happy camper.
Ill shoot some pictures tomorrow, I looked there, didn't find what I wanted, But really, They will be getting a call from me tomorrow...
|
|
|
|
|
10-22-2007, 09:07 PM
|
#8 |
|
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Re: Rocker panels and brush guard...Not a happy camper.
They don't list much on their website. I hear they're working on that, though.
 Give them a call. They are great folks!!!  |
|
|
|
|
10-22-2007, 09:26 PM
|
#9 |
|
Gone Wild
Join Date: Aug 2007
Location: Yukon, OK
Posts: 234
|
Re: Rocker panels and brush guard...Not a happy camper.
I mean they could at least make decent instructions for it, And if I have to cut and drill thats fine, but they should have said that on their site.
|
|
|
|
|
10-22-2007, 09:48 PM
|
#10 |
|
Gone Wild
Join Date: Feb 2007
Location: Southwest Georgia
Posts: 1,469
|
Re: Rocker panels and brush guard...Not a happy camper.
Shucks NoNo you'll make us blush. Yes we are adding items to the website every week but it takes time, plus all the new motor kits and headers yada yada yada. LOL
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Built a brush guard | Design Center | |||
| Happy Birthday Keith! | Announcements | |||
| Brush guards | Design Center | |||
Linear Mode
