11-17-2009, 08:14 AM | #1 |
Getting Wild
Join Date: Sep 2009
Location: Clover, SC
Posts: 128
|
FE290 output shaft specs
Anybody know specs on the output shaft for the FE290? I thought I had read that it was a tapered shaft on a post in this forum. Spent some time searching but couldn't find any details. Need to know diameter and length too. Thanks.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2009, 02:09 PM | #2 |
Getting Wild
Join Date: Sep 2009
Location: Clover, SC
Posts: 128
|
Re: FE290 output shaft specs
C'mon fellas, you gonna make me take the thing off and measure it? If I wanted to buy a replacement engine (11HP) and use the stock drive clutch the output shaft would have to be ???
Any help is appreciated. |
01-04-2010, 05:53 PM | #3 |
Gone Wild
Join Date: Feb 2009
Location: PA
Posts: 173
|
Re: FE290 output shaft specs
im with ya kimmer... i am trying to figure this out as well... did you figure it out? im thinking of doing a swap to and i dont know the shaft size!!!! someone!?
|
01-04-2010, 06:45 PM | #4 |
Bad *** Speller!
Join Date: Oct 2009
Location: Columbus, Ohio
Posts: 1,338
|
Re: FE290 output shaft specs
yes it is a tapered shaft. no key!
|
01-04-2010, 06:56 PM | #5 |
Not Yet Wild
Join Date: Nov 2009
Location: South Georgia, real far south
Posts: 48
|
Re: FE290 output shaft specs
Kimmer,
The info isn't in the CC/Kawasaki manual but is cart standard 30mm 1:10 taper (courtesy of BigBlockMan aka Tom @CPP (sponsors rock!)). Check out his previous post here... http://www.buggiesgonewild.com/desig...red-shaft.html |
01-04-2010, 07:21 PM | #6 |
Gone Wild
Join Date: Feb 2009
Location: PA
Posts: 173
|
Re: FE290 output shaft specs
ok thanks guys. i pulled the bolt out of the end of my shaft on my 290 and there is a key in there... now i didnt pull the clutch off so i dont know if its one of those half round keys just at the end or what. but thanks for the info!!!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Charger Output | Electric Club Car | |||
Thinking BigBlock. Output shaft question? | Big Block Talk! | |||
90 Gas Engine Shaft Specs | Gas Club Car | |||
No output on 488 amp. controller | Electric EZGO | |||
FE290 shaft size | Gas Club Car |